Breadboards

Solderless project board. Electronic Circuit Building and Testing device. Silver plated contacts.
220x120x9mm. 1280 contact terminals (256 blocks with 5 contacts). 400 distribution contact terminals (200 blocks with 2 terminals, four rows). Three connector jacks (4mm).

Solderless project board. Electronic Circuit Building and Testing device. Silver plated contacts.
220x120x9mm. 2560 contact terminals (5124 blocks with 5 contacts). 700 distribution contact terminals (350 blocks with 2 terminals, seven rows). Four connector jacks (4mm).

Solderless project board. Electronic Circuit Building and Testing device.
Dimensions: 165x55x10mm. 830 contact terminals (126 groups of 5 plus 4 rows of 50 terminals).

Electronic Circuit Building and Testing device. Solderless project board with 270 contacts. Extendable. Size: 90x52mm.

Pin jumper wires for use with breadboards.
Package contains 10 pieces. Length: 20cm. Color: Blue.

Pin jumper wires for use with breadboards. Package contains 65 pieces. Lengths: 49x 12cm, 8x 16cm, 4x 20cm, 4x 24cm. Colors: various.

Makes it easy to realize a SMD based circuit, or a mixed SMD and DIP circuit, breadboard style. The board shows a multitude of square, solder-stable, gold-plated pads, which are optimally dimensioned for the use of SMD types 0603, 0805, 1206/1210 as well as type A (= 3216). The corners of the pads are slightly rounded. The SMD components are soldered straight or diagonally from pad to pad. Of course, through-hole components can also be used. For the pad-to-pad connections, zero-ohm SMD bridges or short pieces of wire are recommended. Longer bridges can be made with (insulated) wire. Offset pad rows allow the use of SOT23 components (transistors, diodes, LEDs...).

In order to use integrated circuits (ICs) with the SMD breakout board, special breakout boards were developed to accommodate the SMD circuits, some of which are tiny, and to unbundle their connections to the grid of the pads: These solder connections are designed as half-holes so that they can be soldered onto the pads of the main board. Package contains 8 pieces fpr SO8 size ICs.

Jumper Cable Kit for circuits. The ZipWire Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.

Jumper Cable set for circuits. The Zip wire set provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors. The set contains 40 pcs 20cm female-to-female Zip wires.