Eyelet Boards

Eyelet board for Blackface Amps with Reverb. These AB763 style boards have been used for several models including Super Reverb, Deluxe Reverb, Twin Reverb, Pro Reverb and Vibrolux Reverb.

Eyelet board for Stand Alone Reverb Unit 6G15. Includes isolation board without eyelets and holes. Dimensions: 185x66mm.

Speaker fiber board (aka 'Spider' or 'Junction'). Used on Tweed Bassman Blackface Twin, Blackface Super, etc.

Eyelet Board for Tweed Cap Board as used in a 5F6 Bassman, a 5F8 High Power Twin or generally in 5F6, 5F6-A, 5F8 and 5F8-A circuits.

Eyelet board for Tweed Bassman 5F6.

Eyelet board for Tweed Deluxe 5E3. Size: 7,5x22cm.

Eyelet board for Twin High Power 5F8.

Eyeletboard for Blackface Vibrochamp AA764

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 9,1mm horizontally and 34,4mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Pseudo Eyelet Board 7,5mm with 2x12 eyelets. PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7,5mm horizontally and 26mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Pseudo Eyelet Board 7,5mm with 2x18 eyelets. PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7,5mm horizontally and 26mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Pseudo Eyelet Board 7,5mm with 2x8 eyelets. PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7,5mm horizontally and 26mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Premium versions of the pseudo eyelet boards with 7.5mm spacing. The premium versions feature 3mm thick boards with gold plated contacts. These PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware

Black color board. This board is a recreation of the circuit board found in Tone Bender Professional MKII pedals. When drawing the layout, an original board was closely referenced to ensure a proper match and fit. Since the MKII boards were cut from stripboard, this board follows the same format but is completely ready for soldering with precut traces and drilled mounting holes.

MKII fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in Tone Bender Professional MKII pedals. When drawing the layout, an original board was closely referenced to ensure a proper match and fit. Since the MKII boards were cut from stripboard, this board follows the same format but is completely ready for soldering with precut traces and drilled mounting holes.

Turret board for 100W Plexi Style circuits, with turrets. Dimensions: 298x80mm.