Goeldo Washer Set Nickel TGDWSN

Washers for 'jacking up' a goeldo tremolo system. This may be necessary if the angle of the strings between the bridge and the tension roller of the tremolo is too large and the strings are therefore touching the rear edge of the bridge. As a result, the strings cannot move freely when the tremolo arm is actuated and instead get stuck. On guitars with a strongly arched top, it can happen that parts of the tremolo touch the top and damage the lacquer. This can also be prevented by using the goeldo washers.

The goeldo washer set consists of two 3mm and two 4mm washers, which match the look of the göldo tremolos very well. On the right-handed tremolo versions with offset mounting lug, a 4mm washer must be placed on the right (lever side) of the frame and a 3mm washer on the left, to ensure that the tremolo does not sit tilted above the top. The left-handed versions do not have this lug and therefore have two identical washers (3 or 4mm).