Mundorf

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 39 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 27 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 18 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 12 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 8,2 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 5,6 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 3,9 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 2,7 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 1,8 Ohm.

Mundorf MResist 25W resistor. Tolerance: 5%. Size: 60x15x13mm. 1,2 Ohm.

Mundorf heat sink for Mresist Ultra Series. 2x7,5W. Dimensions (LxHxW): 42 x 38,1 x 25mm.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The small size Mundorf MCoil FERRITE PipeCore Coils made from solid core copper wire and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from solid core copper wire and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from solid core copper wire and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Copper strip for making connections. 300x1x15mm.

Copper strip for making connections. 300x1x10mm.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Dimensions (D x L): 49x66 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 250VDC.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Dimensions (D x L): 43x61 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 250VDC.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Dimensions (D x L): 37x54 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 250VDC.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Dimensions (D x L): 34x46 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 400VDC.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Mundorf MCap capacitor. Capacitance: 18uF. Tolerance: ±5%. Rated voltage: 250V. Size: 29x44mm.

The MResist SUPREME series by Mundorf was developed especially for use with speakers and audio amplifiers. Their premium audio quality has been proven in many high end audio products. The resistors are acoustically not noticeable in the signal path. The resistors are made to the high quality standard that Mundorf is known for.

Dimensions (D x L): 28x46 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 400VDC.

The MResist SUPREME series by Mundorf was developed especially for use with speakers and audio amplifiers. Their premium audio quality has been proven in many high end audio products. The resistors are acoustically not noticeable in the signal path. The resistors are made to the high quality standard that Mundorf is known for.

Dimensions (D x L): 26x39 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 250VDC.

The MResist SUPREME series by Mundorf was developed especially for use with speakers and audio amplifiers. Their premium audio quality has been proven in many high end audio products. The resistors are acoustically not noticeable in the signal path. The resistors are made to the high quality standard that Mundorf is known for.

Mundorf Mcap capacitor. Capacitance: 12uF. Tolerance: ±5%. Rated voltage: 250V. Size: 26x39mm.

The MResist SUPREME series by Mundorf was developed especially for use with speakers and audio amplifiers. Their premium audio quality has been proven in many high end audio products. The resistors are acoustically not noticeable in the signal path. The resistors are made to the high quality standard that Mundorf is known for.

Dimensions (D x L): 26x39 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 400VDC.

The MResist SUPREME series by Mundorf was developed especially for use with speakers and audio amplifiers. Their premium audio quality has been proven in many high end audio products. The resistors are acoustically not noticeable in the signal path. The resistors are made to the high quality standard that Mundorf is known for.

Dimensions (D x L): 24x33 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 250VDC.