MusicNomad Fret Shield MN802

There is nothing like peace of mind while saving time and money. MusicNomad's patent pending Fret Shield sets a new higher standard for total fretboard protection when performing fret work such as polishing, leveling and crowning. Say NO to blue tape with the reusable design that goes on in seconds, fully protects without damaging the fretboard and lasts 100's of fret jobs. The high quality stainless steel is the perfect thickness at .008 (.20mm), uses a precision manufacturing process free of burrs, and leaves all edges smooth and rounded. The innovative formed drop-down edges allow the included rubber bands to hold the Fret Shield in place securely and keep the bands below the top surface to avoid damaging them during the polishing process. Fret Shields come in the most popular Fret Scale sizes and even include a convenient hang hole. Whether your fretboard is finished maple or unfinished rosewood with inlays, your board will thank you for protecting it. That's MusicNomad quality - raising the bar in equipment care.

Features:

protective cover for fingerboards

complete protection of the fingerboard when working on the frets like polishing, leveling and crowning

made of high quality stainless steel with a thickness of 0.20 mm (0,008)

tapered design

smooth and rounded edges due to precise manufacturing process

innovatively formed drop-down edges for stable fixing to the instrument with supplied rubber bands

suitable for instruments with 25 scale and up to 24 frets

suitable for all fret sizes (from narrow to jumbo)

adapts to the radius of the fingerboard

slot sizes from 3.18 mm (0.125) x 52.679 mm (2.074) at the first fret to 3.18 mm (0.125) x 63.426 mm (2.497) at the last fret

dimensions (L x W x H) 520.7 mm x 97.5 mm x 27 mm / 20.50 x 3.389 x 1.063

convenient hang hole

incl. rubber bands