NitorLACK Trans Candy Apple Red - 500ml Can N260765108

Trans candy apple red - 500ml can
This color was first used by Fender in 1963. It was inspired by the layer of sugar candied apples and was Leo Fender’s favorite color. The effect is achieved by applying a coat of silver or gold color toned underneath this finish; the color is semitransparent to reveal the metal particles below.

The NitorLACK products that are suggested to be applied as an undercoat before using this paint to achieve the Candy Apple Red effect are:
art. nr. 50860 / N260767108 silversparkle - 500ml can
art. nr. 50817 / N250004160 silversparkle - 400ml aerosol
art. nr. 50859 / N260774108 shoreline gold - 500ml can
art. nr. 50816 / N250774160 shoreline gold - 400ml aerosol

Colours for vintage-inspired guitars
After great work and exhaustive study by our laboratory and technical department, we have created colours for guitars to faithfully recreate the tones of vintage Fender and Gibson guitars to paint electric guitars. They have been based on original samples from the ‘50s and ‘60s. However, keep in mind that vintage guitar colours may have changed a lot over the years due to the aging of nitrocellulose lacquer and changes in the brands’ own colours. Therefore two guitars finished in 1960 with Fender card colours can look different between them or with respect to a more current guitar today.

Nitrocellulose paint in 500ml can
If you’d like to paint your guitar a perfect finish and you have painting equipment (spray gun and compressor) available, the best choice is nitrocellulose varnish in a can. You’ll get a higher performance by a lower price and with painting equipment the final result will be professional with less effort. It is recommended to dilute the product with our solvent to adjust the viscosity. For the application to be perfect we have two types of solvents: the usual solvent used is Solvent Medium (art. nr. 48138 / N540423104), but for ambient conditions of humidity and temperature more extreme we can use Solvent Retard (art. nr. 72041 / N540425104) to avoid bubbling and blooming in the finish.

The optimal application conditions are between a temperature of 15 to 25 °C and 50 to 70% humidity. The percentage of dilution will depend on the painting equipment and its configuration but it’s recommended to use 10 to 20% solvent. The most common gun peak is 1.3 to 1.5 and the compressor pressure is about 2.5 to 3 bars.