- per page
Transformer T-PWR-561016
Direct replacement Power Transformer. Application: Mesa Boogie Triaxis.
€206,20
including VAT
19%
, [plus shipping]
Transformer T-PWR-561046
Direct replacement Power Transformer. Application: Mesa Boogie Rectifier Recording Preamp.
€136,52
including VAT
19%
, [plus shipping]
Transformer T-PWR-6452L
Direct replacement Power Transformer. Application: Fender Tweed Deluxe Amp (5E3 etc.). New Version: 2 inch stack and C.T. on filament for low noise. Supports 6L6GC and GZ34/5AR4 tubes too!
€125,40
including VAT
19%
, [plus shipping]
Transformer T-PWR-6500
Direct replacement Power Transformer. Application: Fender Tweed Champ 5E1, 5F1,
€123,27
including VAT
19%
, [plus shipping]
Transformer T-PWR-AC30PRE
Power transformer for the UK at Marshall made VOX AC30TB and AC30TBX, Reissue, Model Nr. AC30/6TB.
€160,35
including VAT
19%
, [plus shipping]
Transformer T-PWR-ESC50A
Genuine ENGL Output transformer for ENGL Screamer 50 (E330). For 2x5881 (6L6GC), 50W 8/16 Ohm. Also used in the Thunder series and Fireball 60 (E625).
€150,80
including VAT
19%
, [plus shipping]
Transformer T-PWR-L147P1
Mains transformer for Leslie 122/147, 230V.
€183,70
including VAT
19%
, [plus shipping]
Transformer T-PWR-M100PL
Direct replacement Power Transformer. Application: Marshall 100W Plexi, horizontal version (laying down). Models 1959, 1992, made in 1966 - 1969.
€180,61
including VAT
19%
, [plus shipping]
Transformer T-PWR-M100PN
Direct replacement Power Transformer. Application: Marshall 100W, Models JCM900, JCM2000, 2100, 2101, 4100, 4101, 6100, 6101, 9200, DSL100, TSL100, TSL122, JTM60. Replacement for Dagnall D2105 and T-5826 (TXMA 00061).
€174,75
including VAT
19%
, [plus shipping]
Transformer T-PWR-M30PN
Power transformer for the Marshall JTM30 series like JTM310, JTM312.
€166,60
including VAT
19%
, [plus shipping]
Transformer T-PWR-M40PN
Mains transformer for Marshall, used in JCM 2000 DSL 401.
€89,88
including VAT
19%
, [plus shipping]
Transformer T-PWR-M50PL
Direct replacement Power Transformer. Application: Marshall 50W Plexi, horizontal version (laying down). JTM 45, 1987, 1987, made in 1966 - 1969.
€177,31
including VAT
19%
, [plus shipping]
Transformer T-PWR-M50PN
Direct replacement Power Transformer. Application: Marshall JCM900, Mod. 2500, 2501, 4500, 4501.
€151,84
including VAT
19%
, [plus shipping]
Transformer T-PWR-MJTM18WP
Direct replacement Power Transformer. Application: Marshall 18W Plexi. Can be used with Rectifier tubes EZ81 (6.3V) and GZ34/5AR4 (5V). Vintage correct slotted lamination. Made in Europe to Dagnall specs. For 2x EL84 and up to 4x ECC83, lay-down type: Lamination 3,75 inch Perfect replacement/Upgrade for the Marshall 1974X or 2061X, replaces D4969 and D5323.
€163,23
including VAT
19%
, [plus shipping]
Transformer T-PWR-P6505112P
MAINS transformer for Peavey 6505+ 112 Combo, replaces #30549310. Does not fit the 6505+ 120W Head.
€171,23
including VAT
19%
, [plus shipping]
Transformer T-PWR-PC30P
Mains transformer for Peavey Classic 30, Delta Blues 115 und Delta Blues 210, replaces #705-29339. Comes with Shroud on top.
€100,46
including VAT
19%
, [plus shipping]
Transformer T-PWR-PC50P
Mains transformer for Peavey Classic 50, replaces #705-29312. Comes without end bells.
€134,89
including VAT
19%
, [plus shipping]
Transformer T-PWR-SVTP2
Mains filament transformer for vintage US Ampeg SVT Amps. Vintage correct lamiantion 3 inch, stack: 2 inch. With top shroud.
€108,99
including VAT
19%
, [plus shipping]
Transformer T-PWR-TEHVP
Mains transformer for Trace Elliot, Hexa Valve, made by Dagnall.
€252,28
including VAT
19%
, [plus shipping]
Transformer T-PWR-TH8108
Direct replacement Power Transformer. Application: Hiwatt Custom 200, 6x EL34.
€307,38
including VAT
19%
, [plus shipping]
Transformer T-REV-M100R
Reverb drive transformer, used in the JCM 800 Channel switch amps 2210, 2205, 4210, 4211, 4212. Original part #: D2967 and TXRE-00002.
€36,19
including VAT
19%
, [plus shipping]
Transformer T-RV-125A20B
Direct replacement reverb drive transformer. Application: Fender since 1964 (Fender part 022921), Boogie, etc.
€37,71
including VAT
19%
, [plus shipping]
Tweed Bass Four-Ten Amp-Kit 5F6A K-TWBM
Amp Kit Tweed Bass Four-Ten, 5F6A Style with approx. 40 watt power. This Amp Kit is based on the legendary Fender Tweed Bassman. Famous for its tone which is distinctive and without parallel. Kit incl. 4x10 inch tweed cabinet with nitro-aged tweed and fingers interlocked wood out of american pine for a authentic vintage tone.
€1.482,99
including VAT
19%
, [plus shipping]
Tweed Bass Four-Ten Amp-Kit 5F6A K-TWBM-NC
Amp Kit Tweed Bass Four-Ten, 5F6A Style with approx. 40 watt power. This Amp Kit is based on the legendary Fender Tweed Bassman. Famous for its tone which is distinctive and without parallel. Just the kit without a tweed cabinet:
€907,52
including VAT
19%
, [plus shipping]
Tweed Bass Four-Ten Amp-Kit 5F6A K-TWBM-SP
Amp Kit Tweed Bass Four-Ten, 5F6A Style with approx. 40 watt power. This Amp Kit is based on the legendary Fender Tweed Bassman. Famous for its tone which is distinctive and without parallel. Kit, tweed cabinet and speakers (4x Jensen P10R 25 Watt 8 Ohm).
€1.855,10
including VAT
19%
, [plus shipping]
TWEED BLUES JUNIOR CAB 1x12
Tweed Blues Junior style, 1x12
€625,95
including VAT
19%
, [plus shipping]
TWEED DELUXE HEAD CAB
Tweed Deluxe style amp head cabinet
€600,51
including VAT
19%
, [plus shipping]
Tweed One-5, 5F1 Style Amp-Kit K-TWCHMP-12-SP
Amp Kit Tweed One-5, 5F1 Style with approx. 5 watt power. This Amp Kit is based on the legendary Fender Tweed Champ. It is a famous recording amp of many guitarists, great and highly regarded as blues-harmonica-amp as well. Kit incl. 1x12" tweed cabinet with nitro-aged tweed and fingers interlocked wood out of american pine for a authentic vintage tone. Also includes Jensen P12R 4 Ohm speaker.
€983,87
including VAT
19%
, [plus shipping]
Tweed One-5, 5F1 Style Amp-Kit K-TWCHMP-NC
Amp Kit Tweed One-5, 5F1 Style with approx. 5 watt power. This Amp Kit is based on the legendary Fender Tweed Champ. It is a famous recording amp of many guitarists, great and highly regarded as blues-harmonica-amp as well. Just the kit without a tweed cabinet.
€425,69
including VAT
19%
, [plus shipping]
Tweed One-5, 5F1 Style Amp-Kit K-TWCHMP-SP
Amp Kit Tweed One-5, 5F1 Style with approx. 5 watt power. This Amp Kit is based on the legendary Fender Tweed Champ. It is a famous recording amp of many guitarists, great and highly regarded as blues-harmonica-amp as well. Kit, tweed cabinet and speaker.
€926,06
including VAT
19%
, [plus shipping]
Tweed One-Twelve-16, 5E3 Style K-TWDLX-SP
Tweed 5E3 style, 16 Watt amp. This Amp has just the right volume for club gigs and offers excellent tweed tone. With two volume and one tone control this amp provides an unbelievevable complex tone structure from bell clean chime, sweet compression to raw and dirty tweed tone. Kit, tweed cabinet and speaker (1x Jensen P12R 25 Watt 8 Ohm).
€1.177,65
including VAT
19%
, [plus shipping]
TWEED TWIN (LOW POWER) CAB 2x12
Tweed Twin Low Power style 2x12
€652,86
including VAT
19%
, [plus shipping]
TWIN REVERB / PRO REVERB AMP COVER
Premium Amp Cover for Twin Reverb 100W and Pro Reverb
€52,62
including VAT
19%
, [plus shipping]
VIBROLUX REVERB AMP COVER
Premium Amp Cover for Vibrolux Reverb AB763
€48,83
including VAT
19%
, [plus shipping]
VIBROVERB AMP COVER
Premium Amp Cover for Vibroverb AB763 Fender
€53,35
including VAT
19%
, [plus shipping]
VOX AC15 COMBO AMP COVER
Premium Amp Cover for VOX AC15 Combo Amp
€59,70
including VAT
19%
, [plus shipping]
VOX AC30 / AD120VT AMP COVER
Premium Amp Cover for VOX AC30 / AC30CC2 / AC30CC2X / AD120VT
€68,59
including VAT
19%
, [plus shipping]
TAD GoldCap 5uF 50V
Dimensions (D x L): 16 x 30 mm. Old vintage style casing. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. This model brings more brilliance to the sound when used in the cathode position. Voltage: 50V. Temperature: 85 degrees Celsius.
€1,63
including VAT
19%
, [plus shipping]
TAD AudioCap 20uF 550V
Dimensions (D x L): 25 x 50 mm. The TAD AudioCap is an electrolytic capacitor that has been wound with flat foil, similar to the ones used from the 1950s to the 1970s. Sure to improve the sound of new amps and a fine way to retain the original character when restoring vintage equipment.Voltage: 550V.
€9,19
including VAT
19%
, [plus shipping]
TAD GoldCap 8uF 475V
Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 475V. Temperature: 85 degrees Celsius.
€2,34
including VAT
19%
, [plus shipping]
TAD Mustard Cap 1nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 18x8mm.
Rated voltage: 630VDC. Size (LxD): 18x8mm.
€1,31
including VAT
19%
, [plus shipping]
TAD Silver Mica 10pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€0,86
including VAT
19%
, [plus shipping]
TAD AudioCap 25+25uF 25V
Dimensions (D x L): 25 x 38 mm. The TAD AudioCap is an electrolytic capacitor that has been wound with flat foil, similar to the ones used from the 1950s to the 1970s. Sure to improve the sound of new amps and a fine way to retain the original character when restoring vintage equipment.Voltage: 25V.
€10,00
including VAT
19%
, [plus shipping]
TAD GoldCap 10uF 450V
Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 450V. Temperature: 85 degrees Celsius.
€1,89
including VAT
19%
, [plus shipping]
TAD Mustard Cap 2,2nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 22x7,5mm.
Rated voltage: 630VDC. Size (LxD): 22x7,5mm.
€1,36
including VAT
19%
, [plus shipping]
TAD Silver Mica 50pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,04
including VAT
19%
, [plus shipping]
TAD AudioCap 70uF 350V
Dimensions (D x L): 25 x 49 mm. The TAD AudioCap is an electrolytic capacitor that has been wound with flat foil, similar to the ones used from the 1950s to the 1970s. Sure to improve the sound of new amps and a fine way to retain the original character when restoring vintage equipment.Voltage: 350V.
€8,56
including VAT
19%
, [plus shipping]
TAD GoldCap 15+15uF 450V
Dimensions (D x L): 25 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 450V. Temperature: 85 degrees Celsius.
€8,08
including VAT
19%
, [plus shipping]
TAD Mustard Cap 4,7nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 22x7,5mm.
Rated voltage: 630VDC. Size (LxD): 22x7,5mm.
€1,42
including VAT
19%
, [plus shipping]
TAD Silver Mica 100pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,08
including VAT
19%
, [plus shipping]
TAD AudioCap 220uF 350V
Dimensions (D x L): 30 x 50 mm. The TAD AudioCap is an electrolytic capacitor that has been wound with flat foil, similar to the ones used from the 1950s to the 1970s. Sure to improve the sound of new amps and a fine way to retain the original character when restoring vintage equipment.Voltage: 350V.
€12,23
including VAT
19%
, [plus shipping]
TAD GoldCap 16uF 475V
Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 475V. Temperature: 85 degrees Celsius.
€2,64
including VAT
19%
, [plus shipping]
TAD Mustard Cap 10nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 22x9mm.
Rated voltage: 630VDC. Size (LxD): 22x9mm.
€1,46
including VAT
19%
, [plus shipping]
TAD Silver Mica 120pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,12
including VAT
19%
, [plus shipping]
TAD GoldCap 16+32uF 500V
Dimensions (D x L): 35 x 50 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 85 degrees Celsius.
€10,28
including VAT
19%
, [plus shipping]
TAD Mustard Cap 22nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 22x8,5mm.
Rated voltage: 630VDC. Size (LxD): 22x8,5mm.
€1,79
including VAT
19%
, [plus shipping]
TAD Silver Mica 150pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,24
including VAT
19%
, [plus shipping]
TAD Mustard Cap 33nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 20x12mm.
Rated voltage: 630VDC. Size (LxD): 20x12mm.
€1,89
including VAT
19%
, [plus shipping]
TAD Silver Mica 250pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,37
including VAT
19%
, [plus shipping]
TAD GoldCap 22uF 500V
Dimensions (D x L): 16 x 32 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 105 degrees Celsius.
€3,09
including VAT
19%
, [plus shipping]
TAD Mustard Cap 47nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 22x11,5mm.
Rated voltage: 630VDC. Size (LxD): 22x11,5mm.
€2,09
including VAT
19%
, [plus shipping]
TAD Silver Mica 330pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,55
including VAT
19%
, [plus shipping]
TAD GoldCap 25uF 25V
Dimensions (D x L): 8 x 16 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 25V. Temperature: 85 degrees Celsius.
€0,84
including VAT
19%
, [plus shipping]
TAD Mustard Cap 68nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 20x16mm.
Rated voltage: 630VDC. Size (LxD): 20x16mm.
€2,31
including VAT
19%
, [plus shipping]
TAD Silver Mica 500pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€1,79
including VAT
19%
, [plus shipping]
TAD Silver Mica 680pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€2,33
including VAT
19%
, [plus shipping]
TAD Silver Mica 820pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€2,09
including VAT
19%
, [plus shipping]
TAD GoldCap-BP 25uF 25V
Dimensions (D x L): 16 x 30 mm. Bipolar. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. This model brings more brilliance to the sound when used in the cathode position.
Voltage: 25V. Temperature: 85 degrees Celsius.
Voltage: 25V. Temperature: 85 degrees Celsius.
€1,83
including VAT
19%
, [plus shipping]
TAD Mustard Cap 100nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 32x10mm.
Rated voltage: 630VDC. Size (LxD): 32x10mm.
€2,42
including VAT
19%
, [plus shipping]
TAD Silver Mica 1000pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€2,37
including VAT
19%
, [plus shipping]
TAD GoldCap 32uF 500V
Dimensions (D x L): 25 x 60 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 85 degrees Celsius.
€7,45
including VAT
19%
, [plus shipping]
TAD Mustard Cap 150nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 32x12mm.
Rated voltage: 630VDC. Size (LxD): 32x12mm.
€2,68
including VAT
19%
, [plus shipping]
TAD Silver Mica 1500pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€2,86
including VAT
19%
, [plus shipping]
TAD GoldCap 32+32uF 500V
Dimensions (D x L): 35 x 50 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 85 degrees Celsius.
€10,28
including VAT
19%
, [plus shipping]
TAD Mustard Cap 220nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 32x14,5mm.
Rated voltage: 630VDC. Size (LxD): 32x14,5mm.
€2,78
including VAT
19%
, [plus shipping]
TAD Silver Mica 2000pF
The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.
€3,53
including VAT
19%
, [plus shipping]
TAD GoldCap 33uF 500V
Dimensions (D x L): 18 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 105 degrees Celsius.
€4,66
including VAT
19%
, [plus shipping]
TAD GoldCap 33+33uF 450V
Dimensions (D x L): 25 x 50 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 450V. Temperature: 85 degrees Celsius.
€9,62
including VAT
19%
, [plus shipping]
TAD Mustard Cap 680nF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size (LxD): 30x17,5mm.
Rated voltage: 160VDC. Size (LxD): 30x17,5mm.
€2,37
including VAT
19%
, [plus shipping]
TAD GoldCap 47uF 500V
Dimensions (D x L): 22 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 105 degrees Celsius.
€6,33
including VAT
19%
, [plus shipping]
TAD Mustard Cap 1uF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size: 20x13mm. Size (LxD): 22x12,5mm.
Rated voltage: 160VDC. Size: 20x13mm. Size (LxD): 22x12,5mm.
€2,68
including VAT
19%
, [plus shipping]
TAD GoldCap 47uF 500V radial
Dimensions (D x L): 30 x 50 mm. The TAD GoldCap is a radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. Voltage: 500V. Temperature: 85 degrees Celsius.
€13,40
including VAT
19%
, [plus shipping]
TAD GoldCap 50uF 100V
Dimensions (D x L): 10 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 100V. Temperature: 85 degrees Celsius.
€1,89
including VAT
19%
, [plus shipping]
TAD Mustard Cap 2,2uF
Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size: 26x16mm.
Rated voltage: 160VDC. Size: 26x16mm.
€3,45
including VAT
19%
, [plus shipping]
TAD GoldCap 50+50uF 500V
Dimensions (D x L): 35 x 75 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 500V. Temperature: 85 degrees Celsius.
€10,34
including VAT
19%
, [plus shipping]
TAD GoldCap 70uF 350V
Dimensions (D x L): 18 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 350V. Temperature: 105 degrees Celsius.
€4,34
including VAT
19%
, [plus shipping]
TAD GoldCap 80uF 100V
Dimensions (D x L): 10 x 20 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 100V. Temperature: 105 degrees Celsius.
€2,15
including VAT
19%
, [plus shipping]
TAD GoldCap 80uF 450V
Dimensions (D x L): 26 x 50 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 450V. Temperature: 85 degrees Celsius.
€7,98
including VAT
19%
, [plus shipping]
TAD GoldCap 100uF 350V
Dimensions (D x L): 22 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.Voltage: 350V. Temperature: 85 degrees Celsius.
€6,21
including VAT
19%
, [plus shipping]
- per page
