Electromagnetic shielding spray. 200ml spray can.
Highly conductive copper pigments in acrylic resin. Shielding attenuation: 60-65dB. Touchable within 30 minutes, dry and hard within 24 hours.
Product Safety
Signal word (CLP): Danger
GHS02 GHS07 GHS09
Contains: n-butyl acetate; butanone; ethyl methyl ketone; propyl acetate; 1-methoxy-2-propanol; Monopropylene glycol methyl ether
Hazard statements: (CLP):
H222 - Extremely flammable aerosol.
H229 - Pressurized container: May burst if heated.
H319 - Causes serious eye irritation.
H336 - May cause drowsiness or dizziness.
H410 - Very toxic to aquatic life with long lasting effects.
Safety statements (CLP):
P102 - Keep out of the reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Do not pierce or burn, even after use.
P261 - Avoid breathing vapours/spray.
P271 - Use only outdoors or in a well-ventilated area.
P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C.
P501 - Dispose of contents/container to a hazardous and special waste collection point in accordance with local, regional, national and/or international regulations.
EUH066 - Repeated exposure may cause skin dryness or cracking.
Other hazards Contains no PBT and/or vPvB substances ≥ 0.1%, assessed according to REACH Annex XIII.