Screws, rivets

Wood screw, 2,5cm (similar to US-style #6 1 inch tapping screw), Philips oval head, stainless steel. Used to mount the back panels of many Fender amps from 1940 until today. Does not fit the Fender Hot Rod Serie, Blues DeVille und Blues Deluxe.

Fender Blackface Style baffle screw, #8, 1-1/2 inch. Zinc plated oval head wood screw. Perfect for mounting Blackface and Silverface Fender style floating baffles.

Screw, 4x32mm, black, Phillips Head, self cutting, multi purpose.

Chassis screw (10/32 inch) for Tweed amps. Also fits for the upper back panel in Fender Hot Rod series amps, Blues DeVille as well as Blues Deluxe.

Countersunk finishing Tea Cup Washer, steel. Diameter: inner: 3mm, outer: 9,5mm, height: 2,1mm, rim: 0,9mm.

Countersunk Finishing Tea Cup Washer, steel. Made of a full metal block of stainless steel. Diameter: inner: 5mm, outer: 14mm, height: 3mm.

Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws (M4 size screws will fit too).

Screws/Bolts for Fender chassis straps. Package of 4. Includes nuts.

Original Fender replacement part. Package of two. Includes mounting hardware.

Original Fender 10-32x1.5 inch, Phillips Head, Vintage Amp screws. Set contains 12 pieces. Fender Part number 0036619049.

Finishing Washer, stainless steel, for amplifier back-panel screws. For back-panel screws,
typically used with black Tolex Fender amps since 1966.

Flat fiber washer for insulated mounting of Switchcraft 1/4 inch jacks like SC-11, SC-12A, SC12B and similar.

Hex nut (for 10/32 inch screws). Zinc plated. Locking.

Screw, 4x18mm, Phillips Head, self cutting. Black. Can be used to mount Metal Recessed Jack Plates.

Original Marshall rivets for fastening corners. Sold individually.

Original Marshall silver rivets for fastening corners. Saver package of 100.

Marshall, Washer M6, used for JVM Series like 410H and JTM60 Combo, black.

Mesa Boogie 1/4 inch Jack Hole Plug. Mesa part # 403093.

Screw - #6-32 x 1/2 inch Oval Head Phillips Black Taptite Undercut. Black.

Chassis Strap Screw, Black. #10-24 x 3-5/8 inch (92mm), Phillips Oval Head, Black Oxide.

Black short chassis screw for all early non shock amps (SOB, Mark I etc...) - 8-32x1-1/4 Inch, Oval Head Phillips, Machine Screw.

Screw - #8 x 1/2 inch Round Wafer Head, Wood Screw, Bake Out. Black. Used to mount recessed cabinet handles (10 per handle).

Chassis Screw - Mate with Nickel Chassis Strap (SKU 77285) or Nickel Belt Washer (SKU 51519). Used for: Recto-Verb 25 Head, Rosette 300 Combo.

Washer to secure the bale to the footswitch of a Mark IV. Used in combination with the bale (SKU 77311).

Metric Pozidriv M/C Srews, M3x6mm. Nickel Plated Brass. Perfect for fastening the Bright switch on Fender amps.

Screw M6-1.0x50. Black color. Length: 50mm. Thread: M6. Philips head.

Finishing Tea Cup Washer, steel. Set contains 12 pieces. For early 60s vintage Fender amp back-panel screws, typically used with blonde and brown tolex Fender amps 1960-1964 and the early black Tolex Fender amps and cabinets untill 1965. Diameter: inner: 4mm, outer: 9,5mm, height: 2,1mm, rim: 0,9mm.

Terminal Solder Lockwasher Lug

Anodized black Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.