Banzai

3,5mm Stereo Jack. Black molded with bending protection

In use on Gibson Les Pauls since the 1960s, mini humbuckers are similar to the classic P.A.F. pickup design. But mini hums have a narrower magnetic field and fewer winds per coil, giving them more highs and better clarity. We've gone the extra mile to make our kits the most accurate Deluxe Mini Humbucker reproductions available anywhere. The parts are carefully matched to original pickups from vintage Gibsons. Following our included assembly diagram you can replicate the originals, or decide to create your own versions.

Developer for photo-PCBs (Natriumhydroxid) 1,0kg

Use 10g Natriumhydroxid on 1l water

1A Full Wave bridge rectifier, 400V. DIP4.

12mm thick travel pedalboard. 6 rubber feet to distribute the weight evenly. Dense EPE foam to protect the pedals. Secure hook&loop fastening system. Internal width: 490mm. Internal Depth: 260mm. Internal height: 80mm.

Solderless patch cable system. Set contains 10 plugs and 3 meters of super low capacitance cable.

Triangle Big Muff style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common.

29,5mm diameter (17,5mm black middle part), 17,5mm total height.
Round dial knob with 0-9 numbering and index marks between the numbers.
6,3mm round shaft, screw-on.

36,8mm diameter (22,7mm black middle part), 23,7mm total height.
Round dial knob with 1-10 numbering and index marks between the numbers.
6,3mm round shaft, screw-on.

29,2mm diameter (15mm black middle part), 18,1mm total height.
Round dial knob with 0-9 numbering and index marks between the numbers.
6,3mm round shaft, screw-on.

36,8mm diameter (23,8mm black middle part), 14,8mm total height.
Round dial knob with 1-10 numbering and index marks between the numbers.
6,3mm round shaft, screw-on.

Black plastic handle with diamond pattern and mounting brackets. Center to center measurement is 16cm. Size: 18,68 x 2,8cm. Made of soft rubber and synthetic materials, not hard plastic material.

Digital Caliper Gauge ESD tool for basic length measurement, made of plastic carbon fiber composites. Measuring range: 0-150mm. Resolution: 0,1mm. Lightweight and durable. Easy to read, large LCD display. Battery: SR44/LR44 1.5V. Accuracy: ±0.2mm/0.01 inch.

DIN Connector Jack 5-pin. Diameter: 20mm. Length: 21mm.

DIN Connector Jack 8-pin. Diameter: 20mm. Length: 21mm.

Value Pack: 100 pieces. Assorted signal diodes including 1N4148, 1N4001, 1N4007 and others. All you need for a long while.

Piano DIP switch. 2 Poles

Piano DIP switch. 4 Poles

Piano DIP switch. 6 Poles

Piano DIP switch. 8 Poles

Piano DIP switch. 10 Poles

19,5mm diameter. 16,5mm height. Black with white indicator line.
Cap for top available separately.
Set screw. For 6mm shafts.

35mm diameter. 22,5mm height. Black with white indicator line.
Cap for top available separately.
Set screw. For 6mm shafts.

Colored cap for Direct Pointer knobs.

Colored cap for Direct Pointer knobs.

Zinc metal dish plate, punched for 1x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).

Black metal dish plate, punched for 1x IEC Power Inlet. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).

Black metal dish plate, punched for 2x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).

Black angled metal dish plate, punched for 2x unified XLR connectors (e.g. Neutrik D, Speakon NL4MP, Powercon). Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).

Zinc metal dish plate, punched for 2x unified XLR connectors (e.g. Neutrik D, Speakon NL4MP, Powercon). Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).

Black metal dish plate, punched for 4x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).

4-NAND gate, replaces 74LS00N. Made by RFT. DIP14.

4-AND gate, replaces 74LS08N. Made by RFT. DIP14.

8-bit-D-Flip-Flop, noninverting. Made by RFT. DIP20.

Suitable replacement for Fender. Molded dogbone style brown handle. Measures 15cm center to center.

Texas flag on dome knob. Push-On. Crome.

USA flag on dome knob. Push-On. Chrome.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.

Dome knob, black with inlay on top. 6mm axis.