Banzai

Black Polyolefin heat shrink tubing
50cm segments
Shrinkage 2:1 (6,4 --> 3,2mm)

This low cost assembly contains a pilot light holder, jewel light (green) and a 6.3V lamp

Green knurled pointer knob. Diameter: 17mm. 6,3mm round shaft, set screw.

smooth action, heavy duty 100k wahwah replacement pot
as used in Roger Mayer (Jimi Hendrix guitar tech) effects pedals.

Kit for shielding musical instruments. Includes copper foil of various sizes, shielded cable, wire, solder, isolation tape and instructions manual.

This is the correct screw for BOSS pedals when substituting a 125-B bottom plate for the original. Also works as sub for the M3 x 8mm that is OEM in Ibanez pedals.

Diameter: 16mm. White with white indicator line. 6,3mm axis, set screw.

Length: 19,1mm. Snap fixing with screw hole. The spacer allows easy mounting (and dismounting) of PCBs in a defined distance from the enclosure walls. Hole dimensions (PCB and panel): 4mm. Material: polyamide, natural color.

Axial capacitor, 2,5%
Dimensions (D x L): 4,5x11,5 mm
160 V- / 65 V~

Popular skirtless synth knob. Red fluted pointer knob with silver inlay. Diameter: 16mm
6,3mm round shaft, set screw.

Premium quality 3-pin TO-5/TO39 socket with gold plated pins.

High quality, stranded, small ring. Length: 5m. Twin wire, very flexible, yellow-brown.

50ft spool, green. Pre-bond, high quality, stranded. 0,25mm² cross-sectional area. Umax: 300V. PVC insulation, but the strands are partly bonded so that the wire routes easily.

Full metal, machined aluminum, anodized black with white index mark on the side.
6,3mm round shaft.
Set screw.

Full metal, machined aluminum, anodized black with white index mark on the top. Diameter: 12,7mm. Height: 20mm.
6,3mm round shaft. Set screw.

Securely route cables through enclosures
12mm inner diameter, 19mm outer diameter
Material: soft-PVC
heat resistant up to 80' Celsius

High quality 3-pin TO5/39 transistor socket. Insulators are a special high temperature thermoplastic,
suitable for all soldering operations. Receptacles use Hi-Reliability, 4 finger contacts, rated at 3A.

Black metal knob with white arrow indicator. Diameter: 28,5mm. 6,3mm axis diameter. Set screw.

Classic, vintage style pointer knob. Size (DxH): 20x15,5mm. 6,3mm axis, set screw.

Full Metal, anodized. Diameter: 12mm. Height: 15mm.
6mm round shaft
Set screw.

Electrolytic Radial
Dimensions (D x L): 4x7 mm, RM1,5

Artufo knob, Yellow. Diameter: 24mm
6,3mm round shaft, set screw.

Replacement bottom plate screw, plain. Fits BOSS and Electro Harmonix pedals.

Diameter: 19mm, height: 11,6mm.
6,3mm round shaft, set screw. Blue inlay.

Nylon capacitor mounting clamp for electrolytic capacitors. Given diameter is approximate since clamps are elastic and may be used for smaller or larger capacitors.
Diameter (inner): 40mm. Includes screw and nut.

Covers holes that are no longer needed. Quick, easy and low cost. The convex head phases out to a thin edge, forming a neat covering. Black.
Hole size: 22,2mm. Cap diameter: 25,8mm. Maximum wall thickness: 3,2mm.

Plug, Coax 2,5mm, straight, Plastic. Shaft length: 14mm

Fits 24mm pots. Seals the pot from outside dust and dirt. Low cost way to improve the lifespan of the pot and reduce crackling noises early on. Blue color.

Predrilled die-cast aluminum enclosure, model BBDD. Horizontal 8 holes, 3 footswitches. Enclosure dimensions (LxWxD): 144x119x40mm (including lid) (5.7 x 4.68 x 1.57 inch).

Yellow fluted knob with silver center and white dot index. Diameter: 24mm
6,3mm round shaft, set screw

Gillian fluted knob. Black with silver inlay on top. Round indicator circle. Size (DxH): 12x15mm. 6,3mm shaft hole. Set-screw.

Female Plug, straight.

This low cost assembly contains a pilot light holder, jewel light (red) and a 6.3V lamp

Metal, nickel plated, reflecting inwards, angled refractor style. For 5mm LEDs.

3,5mm stereo plug, full metal construction. Industrial quality. With bending protection.

High quality rotary switch, molded in nylon. 3 poles 4 positions. Gold plated contacts.

Absolute best sounding caps for tone circuits, filters, etc. Size (LxDxH): 6,5x5,5x4mm.

Length: 25mm. Circular spacer with hole, made of insulating material. Hole dimension: 4,2mm. Outer diameter: 6,3mm. Material: polyamide, natural color.

Axial capacitor, 2,5%
Dimensions (D x L): 4,5x11,5 mm
160 V- / 65 V~

Popular skirtless synth knob. Orange fluted pointer knob with silver inlay. Diameter: 16mm
6,0mm round knurled shaft, push-on.

125B size diecast aluminum enclosure. Dimensions (LxWxD): 122x67x39,5mm (including lid) (4.8 x 2.6 x 1.55 inch).

Easily grab and pull tubes out of their sockets without burning your fingers or damaging the tube. Proctologists around the world have relied on this tool for decades, which is now available with a heatproof rubber coating around the arms for an excellent grip. Straight jaws for firm grip, spring steel construction, nickel plated, insulated jaws.

100k Wah Pot with a similar taper and construction as the Dunlop HotPotz I.

XLR-4 Plug high quality.

Full Metal, anodized.
6,3mm round shaft
set screw

Beveled top knob. Black with white indicator dot. Push-on.

Diameter: 19mm. Gold with black indicator line. 6,3mm axis, set screw. Chinese copy of the Davies #1510.

Absolute best sounding caps for tone circuits, filters, etc. Size (LxDxH): 10,92x3,56x7,11mm.

Diameter: 19mm
6,0mm axis, push-on
Taiwanese copy of the Davies #1510