Banzai

Aluminum blank panels for use with eurorack synths. These 1.6mm thick panels feature a painted black side and a bare aluminum side. Simply flip the panel around to match your color scheme. Elongated holes are used for the mounting holes to ensure a proper fit in your rack.

Aluminum blank panels for use with eurorack synths. These 1.6mm thick panels feature a painted black side and a bare aluminum side. Simply flip the panel around to match your color scheme. Elongated holes are used for the mounting holes to ensure a proper fit in your rack.

Black plastic Economy expression pedal shell. Build a custom Wah, Volume, or Expression pedal! Includes rack gear, bottom plate, rubber feet, battery snap, DC connector, input and output jacks, 100k lin potentiometer, rack and pinion gears, DPDT switch, mounting hardware and screws.

Eyelet board for Blackface Amps with Reverb. These AB763 style boards have been used for several models including Super Reverb, Deluxe Reverb, Twin Reverb, Pro Reverb and Vibrolux Reverb.

Eyelet board for Stand Alone Reverb Unit 6G15. Includes isolation board without eyelets and holes. Dimensions: 185x66mm.

Speaker fiber board (aka 'Spider' or 'Junction'). Used on Tweed Bassman Blackface Twin, Blackface Super, etc.

Eyelet Board for Tweed Cap Board as used in a 5F6 Bassman, a 5F8 High Power Twin or generally in 5F6, 5F6-A, 5F8 and 5F8-A circuits.

Eyelet board for Tweed Bassman 5F6.

Eyelet board for Tweed Deluxe 5E3. Size: 7,5x22cm.

Eyelet board for Twin High Power 5F8.

Eyeletboard for Blackface Vibrochamp AA764

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 9,1mm horizontally and 34,4mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Nickel-plated brass Eyelets, mount in 1/8 inch (0,32cm) holes. Bag of 1000 pieces.

Generic steel Faceplate, fits on Fender Deluxe Reverb and Deluxe Reverb. Dimensions: 568mm x 48mm. Material: Aluminium 1,0mm.

Faceplate Plexi 100W Master Volume

Front Panel for 18 Watt Plexi TMB.

Generic Faceplate, black for Stand Alone Reverb Unit 6G15. White markings, holes for controls: Mix, Dwell, Tone, Power, Pilot Light, Fuse, In/Out & Footswitch Jack Holes. Material: Aluminium, 1,0mm.

Faceplate for Blackface Super Reverb AB763. Made of Aluminum 1,0mm. Size: 598x48mm.

Cap for faders. Black with white indicator line. Length: 24mm. Width: 11,2mm. Height: 11,2mm.

Cap for faders. Red with black indicator line. Length: 24mm. Width: 11,2mm. Height: 11,2mm.

High quality phenolic pointer knob with a vintage design. The retro pointer has a thick band that extends above the base allowing for easy manipulation of the knob making it a great option for rotary controls and switches. This solid phenolic knob has an infilled indicator line with a decorative diamond shaped top.

Diameter: 34mm
Round black knob with silver inlay and white line index.
6,3mm round shaft, set screw.

FD7222 Germanium Diode. NOS.

Felt pad used to isolate the instrument's strap button from the instrument to prevent damage. Black color.

Felt pads, ideal to acoustically decouple things.
22mm diameter, adhesive back. Set with 16 pieces.

Female pin header, 12-pin. Straight pins. Gold plated contacts. 2,54mm spacing.

Female pin header, 16-pin. Straight pins. Gold plated contacts. 2,54mm spacing.

Female pin header, 2-pin. Straight pins. Gold plated contacts. 2,54mm spacing.

Female pin header, 3-pin. Straight pins. Gold plated contacts. 2,54mm spacing.

Female pin header, 40-pin. Straight pins. Gold plated contacts. 2,54mm spacing.

Female pin header, 6-pin. Straight pins. Gold plated contacts. 2,54mm spacing.

Dual Female pin header, 10-pin (2 rows of 5 contacts each). Angled pins. Gold plated contacts. 2,54mm spacing.

Dual Female pin header, 12-pin (2 rows of 6 contacts each). Angled pins. Gold plated contacts. 2,54mm spacing.

Dual Female pin header, 16-pin (2 rows of 8 contacts each). Angled pins. Gold plated contacts. 2,54mm spacing.

Dual Female pin header, 44-pin (2 rows of 22 contacts each). Straight pins. Gold plated contacts. 2mm spacing.

Contact cleaning pen for cleaning contacts of all kinds, terminal areas on PCBs, etc. 12cm long rotating pen with brush and 2 replacement brushes.

Approx. 50 pieces of coils, filters and chokes.

Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010 thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel. Comes with 2 sizes: 3-1/8 x 7/8 x .010 inch - 1/4 inch protection on either side of the fret and 3-1/8 x 0.59 x .010 inch - 3/8 inch protection on either side of the fret.

Black. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Chrome. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Finishing Washer, stainless steel. Inner diameter: 5mm. Outer diameter: 14mm. Height 3mm.

Flat fiber washer for insulated mounting of Switchcraft 1/4 inch jacks like SC-11, SC-12A, SC12B and similar.

130mm flat nose pliers with plain jaws. Made in Germany.

Flat washer, zinc plated steel. Size (hole diameter x outer diameter): 4,3x20mm. Perfect for mounting the reverb tank bag at the bottom of the cabinet.

Extra grippy. Chrome plated brass. The grip of the distinctive knurling and the unusual mushroom shape make the knob particularly suitable for push/pull pots. Measurements: 21.6/18.7mm. Diameter: 15mm.

Extra grippy. Nickel plated brass. The grip of the distinctive knurling and the unusual mushroom shape make the knob particularly suitable for push/pull pots. Measurements: 21.6/18.7mm. Diameter: 15mm.

Extra light and extra grippy. Nickel plated aluminum. The almost ridiculous weight of 7.7g is due to the aluminum material used, the grip of the distinctive knurling and the unusual mushroom shape. This somewhat unusual shape also makes the knob particularly suitable for push/pull pots.

Mesa Boogie knob, 31mm diameter, 6,3mm shaft diameter, Set-screw. White lettering: 0-10.