Banzai

Black. These small, skirted knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. THis knob is similar to the Rogan RB-67 Serieswhich is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers. Height: 16,7mm. Diameter: 23mm. 6,3mm shaft hole. Set-screw.

Red. These small, skirted knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. THis knob is similar to the Rogan RB-67 Serieswhich is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers. Height: 16,7mm. Diameter: 23mm. 6,3mm shaft hole. Set-screw.

Cylindrical knob, made of ebony. 6mm split shaft axis. Push-on.

Black knob, similar to the ones used on MXR pedals. D-shaft. This knob is great for use on projects where a stylish knob is needed and space is limited. Diameter: 15mm. Height: 13,5mm.

Cream knob, similar to the ones used on MXR pedals. D-shaft. This knob is great for use on projects where a stylish knob is needed and space is limited. Diameter: 15mm. Height: 13,5mm.

Diameter: 15,4mm, height: 15,3mm.
6,3mm round shaft, set screw
Black cap.

Diameter: 15,4mm, height: 15,3mm.
6,3mm round shaft, set screw
Green cap.

Diameter: 15,4mm, height: 15,3mm.
6,3mm round shaft, set screw
Yellow cap.

Chinese low cost model. Diameter: 13mm, height: 15mm.
6,3mm round shaft, set screw
Red cap.

Black knurled pointer knob without indicator. Diameter: 17mm. 6,3mm round shaft, set screw.

Knurled silver knob with red arrow style indicator on top. Diameter: 16mm. Height: 15mm. For 6mm knurled shafts. Push-On.

Amber transparent lampshade style knob, similar to the ones found on PRS guitars. The lampshade knob sits somewhere between a tophat knob and speed knob but with a unique deco design. These knobs feature 0-10 numbering and fit 6mm knurled shaft pots. Push-On.

Black Leather corners for cabinets similar to those used on Mesa amps. The corners attach to amps with wood tacks (sold separately). Length: 57mm. Width: 39mm.

Red Leather corners for cabinets similar to those used on Mesa amps. The corners attach to amps with wood tacks (sold separately). Length: 57mm. Width: 39mm.

Black Leather Handle Pack, including 4x pan head screws and 4x T-nuts. Handle is made of steel, a leather outer and PVC inner material.

50 pieces of Green 3mm LEDs.

Easily mount an LED below any of the Alpha 14mm clear shaft pots.

Plastic mounting clip for 5mm LEDs. Outwards refractor style.
Without LED.

This small PCB is a simple way to add an indicator light that pulses to the rate of LFOs and clocks used in pedals, synthesizers, and other equipment. Simply connect the positive supply voltage to V+, ground to GND, and the output of a positive signal (0 to V+) such as an LFO or clock to the IN pad. The trimmer can adjust how the LED reacts to the signal.

Neopren mounting clip for 5mm LEDs. Robust, good grip, quick and easy insertion.

plastic mounting clip
without LED

Metal, chrome plated, reflecting outwards, angled refractor style. For 3mm LEDs. Insert is easy to assemble and disassemble since you simply press it together using two fingers to put it in or take it out.

Set of 13 phillips head screws for Leslies. Includes 13 flat washers. 13 pieces replaces all of the screws on the upper cover, lower cover and middle back panel.

Replacement lower drive belt for Leslie models 122 and 147. This belt is made of a high quality clear polyurethane that is both chemical and abrasion resistant ensuring a long life of use. This round belt had a 31 in. diameter with a sanded seam to ensure a smooth drive.

Plug cover for Leslie style cable connectors, screws included. This is the connector cap for the various cables used on a variety of Lelie speakers. The fully enclosed solid plastic cover locks on to the plug or socket providing a safe and secured connector. Pairs with SKU 78367 plugs, SKU 78368 sockets, and others. Note: this listing is for the cover only. Plugs and sockets pictured are for demonstration and must be purchased separately.

Lid Dish for Rubber Foot, Zinc finish. These steel lid dishes allow you to stack cases with rubber feet, providing a more secure and stable method than before.

This two-piece dish kit (use one female and one male) is a clever solution for outfitting cases with convenient and unobtrusive hooks to hang a removable lid on when not on the case. This solves the problem of needing to stack many lids in a separate location as well as eliminating the possibility of mixing lids with cases.

50 of the most popular Linear ICs including TL072, NE555, 7805, LM741, LM324, LM358, 78L05 and many more. These are all top quality brand new IC's and not factory seconds or discontinued lines. Packed in separate bags.

Lock Nut DIN985/ISO10511 M3. Made of Galvanized Steel, Blue, 5um, A2K. Outer diameter: 5,5mm. Height: 4mm. Thread size: M3.

Lockwasher Terminal 3,2x0,5mm. Bronze tinned 0,5mm.

Serrated lockwasher. DIN6798. Steel.

for footswitches

Lockwasher, made of tin plated steel. Inner diameter: 12mm. Outer diameter: 17,2mm. Inner toothing.

Lockwasher, split. DIN 127. Inner diameter 3mm.

Lockwasher, split. DIN 127. Inner diameter 5mm.

Lockwasher, split. DIN 127. Inner diameter 8mm.

150mm long nose pliers with plain long jaws.

Louvre Dish 2x4 Horizontal. Made of 1,2mm (18 gauge) steel. Dish Depth: 7mm (1/4 inch). Zinc plated.

Toggle Switch, DPDT on-on
Good quality, made in Taiwan
Dimensions: 12x12x13mm. Shaft: 6mm.

Toggle Switch, DPDT on-on, with flat lever.
made in Taiwan
Dimensions: 8x13x13mm. Shaft: 6mm

Toggle Switch, SPDT on-on, with flat lever.
made in Taiwan
Dimensions: 8x13x13mm. Shaft: 6mm

Toggle Switch SPDT on-(on)
one side is momentary, the other one is latching
Dimensions: 8x13x13mm. Shaft: 6mm

Toggle Switch, SPDT on-on
made in Taiwan
Dimensions: 8x13x13mm. Shaft: 6mm

PC mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.

Replacement soldering iron 48W 24V, for soldering station LS-450 (SKU 33863) and LS-1000 (SKU 24715).

Ekulit LSM-45F Miniature speaker . 8 Ohm. Power rating: 0,1W. Diameter: 45mm. Thickness: approx. 15mm.

Electro Harmonix recommended accessory for their pedals. The perfect compliment to the HOG (control the 7 Expression modes), Holiest Grail (create dramatic swells and fades), Bi-Filter (remote filter sweep control), and Tube EQ (remote bandpass control for wah effects). This is a universal pedal with selectable polarity making it compatible with most keyboards and MIDI controllers.

M12 Footswitch Nut, made of Aluminum. Green. Outer diameter: 19,2mm. Thickness: 4,6mm. Suitable for M12 Foot Switches.

M12 Footswitch Nut, made of Aluminum. Red. Outer diameter: 19,2mm. Thickness: 4,6mm. Suitable for M12 Foot Switches.