Banzai

Stainless steel M6 flat washers that are nearly identical to the chassis mounting washers used on many Marshall amps. These oversized M6 washers pair with 30mm M6 screws to attach the amplifier chassis to the head cabinet. Fits any Marshall head that uses M6 screws. Also fits #12 imperial screws. Package contains 5 pieces.

When you are using an M8 pot with a 3/8 inch hole or control plate, then this rubber ring will help to keep the pot aligned safely in the middle.

12 pieces of Single position machine pin sockets. These pressfit sockets are mounted by inserting into a PCB hole and applying some force. They stay firmly in place with tension and can then be easily soldered to the circuit board. These sockets can fit any pin spacing, such as the non-standard 3,81mm spacing of the vintage-style stripboard (vs. 2,54mm on standard stripboard). They can also jump rows so that they are not all in a line.

FZ-1 fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in Maestro FZ-1 pedals. The board is styled after the original version that can also be found in early serial Maestro FZ-1A pedals.

Maestro Style Tremolo Arm. Angled round steel arm with specially shaped, large plastic tip. Overall length 19.5cm, 6mm diameter. Colour: Nickel with semi-transparent ivory tip.

Large round magnetic parts tray. Diameter: 100mm.

Magnetic tape. Black. Easily moveable or removeable from magnetic surfaces. Length: 5m.

Marconi style Classic knob. Blue. Diameter: 25,5mm. 6,3mm set-screw with two massive brass screws.

Marconi style Classic knob. Light Blue. Diameter: 25,5mm. 6,3mm set-screw with two massive brass screws.

Marconi style Classic Concentric knob. Black with natural aluminum base. Diameter base: 25,5mm. Diameter knob: 17,8mm. Shaft diameter: 6/4mm. Set-screw.

Marconi style Classic Concentric knob. Grey with natural aluminum base. Diameter base: 25,5mm. Diameter knob: 17,8mm. Shadt diameter: 6/4mm. Set-screw.

Marconi style fluted pointer knob. Black. Diameter: 17mm. Height: 15mm. 6,3mm set-screw with two massive brass screws.

Marconi style fluted pointer knob. Grey. Diameter: 17mm. Height: 15mm. 6,3mm set-screw with two massive brass screws.

Marvelous Strap Locks Black. Pack of 2.

Powerful, low cost handheld megaphone with a stepless volume control. Distance up to 600m. 10 Watt. Sirene function. Dimensions: 25x16x24cm. Use with 4x Mono batteries (not included).

Metal corner, 41x41x41mm. Nickel color.

Metal corner, 42x42x42mm. Stackable (stack with MC-8504).

Medium size, three legs. One screw on each leg. Made of 1,5mm steel.

Small size, ball shape, three legs. Made of 1,2mm steel. Black.

Large size, ball shape, three legs. Two screws on each leg for increased stability. Made of 1,5mm steel.

Large size, ball shape, two legs. Stackable. Two screws on each leg for increased stability. Made of 1,5mm steel. Left corner.

Solid Metal Drill Stand. For all small drills. High stability, accurate operation. Lever for perfect continuity in drilling, with depth stop. Adjustable spring return on lever. Facilitates either vertical or horizontal or honing use.
Overall height: 260mm. Base: 135x195mm. Drilling Depth: 30mm max. Range of height adjustment: 0-160mm (depends on drill). Weight 1500g.

Metal Oxide Varistor for surge suppression. Used in Mesa Boogie Amps, 130V. Two 130V MOV are often used to convert Boogies to 230V.

Recessed for mounting speaker cabinet jacks. Diameter: 49,5mm.

Sturdy metal saw (250mm blade), with wooden handle.

Metal grill 10 inch (256mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).

Metal grill 15 inch (380mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).

Metal grill 8 inch (200mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).

Silver with recessed triangle indicator. Diameter (bottom): 13mm. Height: 17,5mm. 6,0mm axis. Push-on.

Micro Teflon Powder for saddles. Reduces friction, reduces string breakage, makes it easier to tune the instrument and improves tuning stability.

Microphone cable, shielded, with bending protection. 2x0,75mm diameter. Length: 2m
6,3mm mono plug to XLR connector (female).

Black with white indicator dot. Diameter: 7,6mm. Height: 14mm. 6,0mm axis, push-on.

Cream with black indicator dot. Diameter: 7,6mm. Height: 14mm. 6,0mm axis, push-on.

Dark Grey with white indicator dot. Diameter: 7,6mm. Height: 14mm. 6,0mm axis, push-on.

Grey with white indicator dot. Diameter: 7,6mm. Height: 14mm. 6,0mm axis, push-on.

Red with white indicator dot. Diameter: 7,6mm. Height: 14mm. 6,0mm axis, push-on.

White with black indicator dot. Diameter: 7,6mm. Height: 14mm. 6,0mm axis, push-on.

Chrome knob for Gibson-style toggle switches. Diameter: 12mm. Length: 14,5mm. 4,9mm hole size. Set screw.

Nickel knob for Gibson-style toggle switches. Diameter: 12mm. Length: 14,5mm. 4,9mm hole size. Set screw.

Chrome knob for Gibson-style toggle switches. Diameter: 12mm. Length: 14,5mm. M4 inside thread. The M3 hex screw on the side allows the installation on smaller or larger switch shafts. In the latter case the hole must be enlarged accordingly.

Nickel knob for Gibson-style toggle switches. Diameter: 12mm. Length: 14,5mm. M4 inside thread. The M3 hex screw on the side allows the installation on smaller or larger switch shafts. In the latter case the hole must be enlarged accordingly.

Diameter: 13mm. Height: 15,7mm.
6,3mm axis, set screw
Taiwanese copy of the Davies #1900. Made of ABS instead of phenolic. Knob has a different 'feel' than the phenolic version (SKU26755).

Diameter: 13mm. Height: 15,7mm.
For 6,0mm knurled shaft, push-on
Taiwanese copy of the Davies #1900. Made of Phenolic instead of ABS.

Diameter: 13mm. Height: 15,7mm.
For 6,0mm knurled shaft, push-on
Taiwanese copy of the Davies #1900. Made of Phenolic instead of ABS.

Diameter: 13mm. Height: 15,7mm.
For 6,0mm knurled shaft, push-on
Taiwanese copy of the Davies #1900. Made of Phenolic instead of ABS.

Diameter: 13mm. Height: 15,7mm. Transparent clear.
6,3mm axis, set screw
Taiwanese copy of the Davies #1900

Diameter: 13mm. Height: 15,7mm.
6,3mm axis, set screw
Taiwanese copy of the Davies #1900

Diameter: 13mm. Height: 15,7mm.
6,3mm axis, set screw
Taiwanese copy of the Davies #1900

Diameter: 13mm. Height: 15,7mm.
For 6,0mm knurled shaft, push-on
Taiwanese copy of the Davies #1900. Made of Phenolic instead of ABS.