Banzai

Neck Plate screw, made of premium quality Stainless Steel.

Neck Plate screw, made of premium quality Stainless Steel. Cross recessed raised countersunk screw.

Neck Plate screw, made of premium quality Stainless Steel. Cross recessed raised countersunk tapping screw. 4,2x38mm.

Short neck plate screws, phillips head, #8 x 1-3/8 inch (35mm). Black. Set contains 4 pieces.

Short neck plate screws, phillips head, #8 x 1-3/8 inch (35mm). Gold. Set contains 4 pieces.

Nickel end cap for strap handles.

Nitrocellulose Lacquer Black, 500ml.

Nitrocellulose Lacquer Olympic White, 500ml.

Nitrocellulose Primer Grey, 500ml.

17x10mm, non-slip rubber with good contact characteristics, good grip
set of four pieces

Notched precision straightedge for stringed instruments. Made of Steel, with comfortable grip.

6/32 inch thread (approx. 2,5mm) screw. Used to mount noval tube sockets.

NTC resistor 15 Ohm 3A.

NTC resistor 33 Ohm 2,5A.

Neck plate with serial number. Size: approx 64,5 x 51 x 1,6mm. '60000…' numbers. Gold.

Nut 10-48 UNS-2A for subminiature toggle switches. Made by Dailywell.

3/8 inch hex nut, nickel. Commonly used with inch threaded potentiometers.

Steel nut file, made of steel. Size: 12,5 x 1,4cm.

M10 hex nut, nickel. Commonly used with potentiometers.

M12 hex nut, gold. Commonly used with switches. M12.0-1.00P.

M12 round, decorative nut, nickel. Commonly used with switches.

M12 vintage style round nut, nickel. Inch thread. Commonly used with switches or with thick top guitars.

Hex Nut M12x0,75. Made of Steel.

M6 hex nut, gold. Commonly used with toggle switches. Thread technical specification: M6.0-0.75P.

M8 hex nut, nickel. Commonly used with potentiometers. Outside diameter : 10,8mm. Thread: M8-0.75P.

M9 hex nut, gold. Commonly used with jacks.

M9 hex nut, satin chrome. Commonly used with jacks.

10mm, high quality nut. Metric thread. Thread: M10x0,75mm.

Double thick decorative nut. M12 size.

O Ring for Leslie Motor Assembly

OC44N Ge-Transistor PNP TO1S. 0,1A 15V. We had a batch of these transistors made for us, datecode 2438 (week 38 of 2024). They were manufactured on the original machinery and from the very last batch of NOS raw materials that the manufacturer had left in stock. This is the final batch available - there will be no more of these in the future.

Replacement keyway if the keyway on your valuable octal tube has broken off the base. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.

This 8 pin octal socket saver with mounting bracket is often used in tube testers. It takes the main wear and tear from many tube insertions and removals. Replacing the socket saver is much easier then replacing the original socket in the tester.

6/32 inch (approx. 4,8mm) screw. Length: 1/2 inch (12,7mm). Used to mount 8-pin tube sockets, fiberboards or capacitor clamps.

Orange Bronco/Levant Tolex covering. 137 cm wide. Sold per yard (91,4 cm), please specify length.

Original Orange Knob for Orange Amps, 28mm diameter, 20,7mm Diameter without skirt. 15,5mm high. 6,3mm shaft, with set screw.

Orange Nubtex Tolex covering. 137 cm wide. Sold per yard (91,4 cm), please specify length.

Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Diameter: 19mm.

Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Diameter: 42mm.

Pickup flat set for Precision Bass, Black, 4 pieces tops and bottoms.

Plastic bobbin for soapbar P-90, Black.

PA-Speaker jack, square chassis mount.

Palmer power supply. 9V 200mA.

Panel Meter SD-39 200mA

Panel Meter SD-39 AC 300V

Panel Meter SO-45 100mA

Panel Meter SO-45 200mA

Panel Meter SO-52 100mV

These modules are low profile LCD digital panel meters conforming to DIN standard panel sizes 24 mm x 48 mm and 36 mm x 72 mm. They use advanced components and construction techniques to provide performance combined with elegant appearance at a cost previously unattainable. The LED backlight provides clear, easy to read display under all lighting conditions. A large character height enables the LCD display to be easily read. Low power ideal for battery powered applications.