Banzai

Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. Fits M8 thread pots.

Standard potentiometers may have tolerances of 20%. We match two potentiometer to be within 2% of their designated value.

Loudspeaker output transformer amplifier for general use: e.g. increase of output of small radio- CD- tape- microphone amplifiers etc.

Stabilized power supply with output 9 / 12 / 15VDC (1500mA) - 18 / 20V (1200mA) - 24V (1000mA). With 7 changeable adaptor plugs.

73x62x48mm ABS Polycarbonate enclosure, black. Plugs into wall socket outlet.

Laboratory Power Supply Unit. Voltage: 0-15V DC. Current 0-2A. Large background-lighted digital displays. Short-circuit proof. Metal enclosure. Size: 130x150x210mm.

Switch-mode power supply, 1.0 A, high energy efficiency, complies with EU ecodesign directive. Selectable Output: DC 3/4.5/5/6/7.5/9/12 V. Contains 7 plug-in adapters. Selectable polarity by reversing the supplied adapters.

Switch-mode power supply,high energy efficiency, complies with EU ecodesign directive. Selectable Output Voltage: DC 5/6/7,5/9/12/13,5/15 V. Output current: 3/3/3/3/3/2,4/2,4 A, 36 VA. Contains 7 plug-in adapters. Selectable polarity by reversing the supplied adapters.

Stabilized power supply with output 3/4,5/5/6/7,5/9/12V. Includes 7 adaptors: USB/2,5/3,5/3,5x1,35/5,0x2,1/5,5x1,5/5,5x2,5mm. Power LED. Includes USB adaptor. 2250mA 27W max.

Low cost Flat pliers (30mm).

Low cost pliers (25mm).

This is a 1972 Fender Tele Deluxe/Custom pre-assembled wiring kit with four selected close tolerance 500k pots. Comes with a standard L type toggle switch for Fender reissues and originals. Use set screw knobs only.

This is a pre-assembled standard Gibson ES-335 style kit designed specifically for semi hollow body guitars. It comes stock with selected CTS vintage taper guitar potentiometers. It fits most ES-335 style copies and originals.

This is a pre-assembled premium deluxe Jazz Bass style wiring kit using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.

This is a pre-assembled premium deluxe wiring kit for Les Paul guitars, using the best, selected parts. It comes stock with selected standard shaft CTS Premium guitar potentiometers. It will fit Les Paul style guitars with thinner tops.

This is a pre-assembled premium deluxe wiring kit for SG guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.

This is a pre-assembled premium deluxe wiring kit for Strat style guitars with one humbucker and two singlecoils, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. It uses a master volume, shared tone control for the neck and middle pickups, and a tone control for the bridge pickup. 500k pots give the humbucker the correct load and we use a resistor on the single coils to give them the correct 250k load so there is no compromise mixing single coils with humbuckers.

This is a pre-assembled premium deluxe 3-way wiring kit for Tele style guitars. It uses a custom 3-way switch to give you standard Tele switching features with 1 volume and 1 tone.

This is a pre-assembled premium deluxe wiring kit for Tele Custom style guitars. It has been designed specifically with 500k pots for Telecasters with a humbucker or P-90 in the neck and a single coil in the bridge. It uses a 470k resistor in series with the single coil bridge pickup to give the single coil a 250k load, while giving the humbucker it's proper 500k load.

Low cost set that is very useful in many applications. It contains 5 Precision screwdrivers. 2x Philips (Sizes 0,5mm / 1mm), 3x Allen Screw (Sizes 1,5mm / 2,0mm / 2,5mm).

Low cost miniature probe. Black color. 35mm shaft length, 53mm total length.

Low Cost probe with tip. Red color. Tip with 4mm jack. 65mm shaft.

Low cost probe. Red/grey color. With 4mm jack. Flexible 90mm shaft.
Umax=1000V, Imax=5A

Professional, heavy duty tool, made for rivets with a diameter of 2,4, 3,2, 4,0, 4,8mm. Made of Aluminum.

Programmable soldering station, 24V, 48W. Great soldering comfort at a great price. Fast temperature changes possible, stand-by-function. Complete with soldering iron, stand and sponge.

Pseudo Eyelet Board 7,5mm with 2x12 eyelets. PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7,5mm horizontally and 26mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Pseudo Eyelet Board 7,5mm with 2x18 eyelets. PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7,5mm horizontally and 26mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Pseudo Eyelet Board 7,5mm with 2x8 eyelets. PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7,5mm horizontally and 26mm vertically. The two mounting holes have a 3,2mm diameter to fit M3 or 4-40 hardware.

Premium versions of the pseudo eyelet boards with 7.5mm spacing. The premium versions feature 3mm thick boards with gold plated contacts. These PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware

The PT2387 is a 3D Effect Audio Processor IC utilizing CMOS Technology. It features a specially designed PTC HRTFs Filter and space-enhanced circuit, thereby, guaranteeing excellent audio quality and performance. Least external components, excellent 3D effect audio output, built-in LED display driver add to the enhanced quality of PT2387. Pin assignments and application circuit are optimized for easy PCB Layout and cost saving benefits.

Princeton PT2396 digital delay/echo IC

Princeton Semiconductors PT 2399 digital Delay/Echo IC, SOP16

PTFE Sleeving for 0,5mm diameter wire. Thin wall thickness: 0,18mm. Sold per meter. Enter how many meters you need.

PTFE Sleeving for 1,5mm diameter wire. Sold per meter. Enter how many meters you need.

Purple tolex covering, bronco/levant. Vintage style. 137 cm wide.

Diameter: 19mm
6,0mm axis, push-on
Taiwanese copy of the Davies #1510

Stereo Push-Push Blend Pot A500K / C500K with DPDT switch and solder lugs. Knurled split shaft with 18-teeth metric knurl. These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 250K lin with DPDT switch and PCB terminals. Knurled split shaft with 24-teeth inch knurl.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 250K log with DPDT switch and solder lugs. Knurled split shaft with 24-teeth inch knurl. These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 500K lin with DPDT switch and PCB terminals. Knurled split shaft with 24-teeth inch knurl.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 500K log with DPDT switch and PCB terminals. Knurled split shaft with 24-teeth inch knurl.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

XXL thread length (19mm). Push-Push Pot 25K log with DPDT switch and solder lugs. Knurled split shaft with 20-teeth inch knurl. These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 250K log with DPDT switch and PCB terminals. Knurled split shaft with 18-teeth metric knurl.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 500K lin with DPDT switch and PCB terminals. Knurled split shaft with 18-teeth metric knurl.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 500K log with DPDT switch and PCB terminals. Knurled split shaft with 18-teeth metric knurl.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 250K log with PCB terminals. Knurled split shaft with 18-teeth metric knurl. Non-shorting DPDT switch. These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

Push-Push Pot 500K lin with PCB terminals. Knurled split shaft with 18-teeth metric knurl. Non-shorting DPDT switch.
These high quality audio potentiometers are suitable for use in both professional and consumer applications. Pots have brass thread and shaft. Washer, and hex nut are included.

PCB for Push-Push Pots. Designed for On-Off switching function.

PVC binding, size: 1700 x 6 x 1,0mm. White 2-ply (w/b).