Banzai

Small, skirted, solid metal aluminum knob with scalloped grip, black with white indicator line and set screw. Diameter (bottom): 18,8mm. Diameter (top): 13mm. Shaft hole: 6,3mm.

Large, skirted, black plastic knob with scalloped grip and silver inlay on top. White indicator arrow on skirt. Diameter (bottom): 28,5mm. Diameter (top): 19mm. Shaft hole: 6,3mm.

Handmade, gold plated, silver alloy fuse. Size: 5x20mm. 0,5A Slow-Blow. Withstand voltage: 250V (T) slow fuse.

Handmade, gold plated, silver alloy fuse. Size: 5x20mm. 10A Slow-Blow. Withstand voltage: 250V (T) slow fuse.

Handmade, gold plated, silver alloy fuse. Size: 5x20mm. 2,0A Slow-Blow. Withstand voltage: 250V (T) slow fuse.

Handmade, gold plated, silver alloy fuse. Size: 5x20mm. 4A Slow-Blow. Withstand voltage: 250V (T) slow fuse.

Handmade, gold plated, silver alloy fuse. Size: 5x20mm. 6,3A Slow-Blow. Withstand voltage: 250V (T) slow fuse.

Handmade, gold plated, silver alloy fuse. Size: 6x32mm. 1A Slow-Blow. Withstand voltage: 250V (T) slow fuse.

Silver Bronco/Levant Tolex covering. 137 cm wide. Sold per yard (91,4 cm), please specify length.

Black aluminum knob, anodized black with silver index mark on the top and silver ring around the rim. Diameter: 15mm. Height: 17mm.
6mm round shaft. Push-On.

Absolute best sounding caps for tone circuits, filters, etc. Highly recommended for all vintage restorations. Size (LxDxH): 8,5x3,8x7,11mm.

Silver piping, thin. Price per meter.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 0,5A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Unidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 1A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Unidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 3,15A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Unidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 5A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Unidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 0,5A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Bidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 1A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Bidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 3,15A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Bidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 5A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Bidirectional.

Handmade, gold plated, Single Crystal Silver Nano fuse. Size: 5x20mm. 8A Slow-Blow. Withstand voltage: 250V (T) slow fuse. Bidirectional.

RCA-fester-style large vintage style skirted pointer knob. The knobs feature a hex set screw, and fit 6,3mm solid shaft potentiometers. Dark Red.

Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 30mm. Fits 1/4 inch (6,35mm) pot shafts.

ABS enclosure, black. Size: 120x56x18-35. slightly slanted top.

Slide Switch SP4T. Switch Function: On-On-On-On. Shorting (MBB). Current Rating: 300mA AC. Voltage Rating: 125VAC.

Small black slider knob with white indicator line. Size: 10x11mm. Shaft size: 4x1,2mm.

Replacement screw for Switchcraft Slider switches, commonly found in Jazzmaster / Jaguar guitars.

Slug piece for mini humbucking.

Makes it easy to realize a SMD based circuit, or a mixed SMD and DIP circuit, breadboard style. The board shows a multitude of square, solder-stable, gold-plated pads, which are optimally dimensioned for the use of SMD types 0603, 0805, 1206/1210 as well as type A (= 3216). The corners of the pads are slightly rounded. The SMD components are soldered straight or diagonally from pad to pad. Of course, through-hole components can also be used. For the pad-to-pad connections, zero-ohm SMD bridges or short pieces of wire are recommended. Longer bridges can be made with (insulated) wire. Offset pad rows allow the use of SOT23 components (transistors, diodes, LEDs...).

Vintage style phenolic chickenhead pointer knob. Length: 31mm. Diameter(bottom): 20mm. Height: 17,5mm.

Gold aluminum knob with index notch on the top. Smooth surface. Diameter: 15mm. Height: 17mm.
6mm round shaft. Push-On.

Silver aluminum knob with index notch on the top. Smooth surface. Diameter: 32mm. Height: 17mm.
6mm round shaft. Push-On.

Quad 2-input or-Gate HFO DIP14 = 74ls32.

Wine red snakeskin tolex. Price per yard (91,4 cm)

Snark SN-3 Chromatic Guitar Tuner and Metronome. Tunes with great accuracy.

Snark SN-5 Clip-On Chromatic Tuner for Guitar, Bass and Violin. Tunes with great accuracy.

In order to use integrated circuits (ICs) with the SMD breakout board, special breakout boards were developed to accommodate the SMD circuits, some of which are tiny, and to unbundle their connections to the grid of the pads: These solder connections are designed as half-holes so that they can be soldered onto the pads of the main board. Package contains 8 pieces for SO8 size ICs.

Soap Bar pickup mounting screw. Size: #4 x 1-1/2 inch long, phillips head. Black. Package contains 4 pieces.

6 pin female socket with wavy washer, for Leslies.

Steel plate for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. 8-pin (octal) socket cover. 6,5x3,5mm mounting holes. 40mm center to center.

Black with three outlets. Cable length: 1,4m.

White with six outlets. Cable length: 1,6m.

White, switched, with three outlets. Cable length: 1,4m.

Soft touch surface, grey indicator line

PCB for converting SMD SOIC-16 packages to through hole DIP-16 footprints. Solder the device to this PCB then attach pin headers (sold seperately) to connect to through hole footprints on PCBs, breadboards and IC sockets. This adapter is also compatible with SOP-14 packages.

PCB for converting SMD SOIC-8 packages to through hole DIP-8 footprints. Solder the device to this PCB then attach pin headers (sold seperately) to connect to through hole footprints on PCBs, breadboards and IC sockets.

This solder fume remover has an activated charcoal filter. Dangerous fumes are removed from the source before they can dissipate into the surrounding area.

Universal solder iron holder for soldering irons up to 80W. Item has a metal base, spring solder iron holder and protection against accidental contact.

Stand for soldering irons with cast iron foot, spring solder iron holder and protection against accidental contact.