Banzai

This low cost assembly contains a pilot light holder, jewel light (red) and a 6.3V lamp

Metal, nickel plated, reflecting inwards, angled refractor style. For 5mm LEDs.

3,5mm stereo plug, full metal construction. Industrial quality. With bending protection.

High quality rotary switch, molded in nylon. 3 poles 4 positions. Gold plated contacts.

Absolute best sounding caps for tone circuits, filters, etc. Size (LxDxH): 6,5x5,5x4mm.

Length: 25mm. Circular spacer with hole, made of insulating material. Hole dimension: 4,2mm. Outer diameter: 6,3mm. Material: polyamide, natural color.

Axial capacitor, 2,5%
Dimensions (D x L): 4,5x11,5 mm
160 V- / 65 V~

Popular skirtless synth knob. Orange fluted pointer knob with silver inlay. Diameter: 16mm
6,0mm round knurled shaft, push-on.

125B size diecast aluminum enclosure. Dimensions (LxWxD): 122x67x39,5mm (including lid) (4.8 x 2.6 x 1.55 inch).

Easily grab and pull tubes out of their sockets without burning your fingers or damaging the tube. Proctologists around the world have relied on this tool for decades, which is now available with a heatproof rubber coating around the arms for an excellent grip. Straight jaws for firm grip, spring steel construction, nickel plated, insulated jaws.

100k Wah Pot with a similar taper and construction as the Dunlop HotPotz I.

XLR-4 Plug high quality.

Black metal knob with white arrow indicator. Diameter: 18,8mm. 6,3mm axis diameter. Set screw.

Classic, vintage style pointer knob. Size (DxH): 21x19,8mm. 6,0mm axis, set screw.

Full Metal, anodized.
6,0mm round shaft
set screw

Plug, Coax 2,1mm, straight, Plastic. Shaft length: 14,5mm. High quality. Made in Japan.

Full metal, machined aluminum, anodized black with white index mark on the top. Diameter: 12,7mm. Height: 20mm.
6,3mm round shaft. Set screw.

Full metal, machined aluminum, anodized black with white index mark on the side.
6,3mm round shaft.
Set screw.

Electrolytic Axial. Made in Taiwan by SSC. Temperature rating: 85°C. Dimensions (D x L): 13x25 mm

ADA Knob Black Large. Size (DxH): 19x19,5mm.

Made from a block of solid metal. Measures 48mm diagonally, weighs over 100 grams.
6,3mm round shaft, fastened by two set screws. Anodized black.

Nylon capacitor mounting clamp for electrolytic capacitors. Given diameter is approximate since clamps are elastic and may be used for smaller or larger capacitors.
Diameter (inner): 44mm. Includes screw and nut.

Covers holes that are no longer needed. Quick, easy and low cost. The convex head phases out to a thin edge, forming a neat covering. Black.
Hole size: 25,4mm. Cap diameter: 30,5mm. Maximum wall thickness: 3,2mm.

Dome knob, chrome, heavy duty quality. For 6mm axis. With set screw.

Fits 24mm pots. Seals the pot from outside dust and dirt. Low cost way to improve the lifespan of the pot and reduce crackling noises early on. Red color.

Predrilled die-cast aluminum enclosure, model BBDD. Horizontal 9 holes, 2 footswitches. Enclosure dimensions (LxWxD): 144x119x40mm (including lid) (5.7 x 4.68 x 1.57 inch).

Filter media made of polyurethane foam for replacement of old fan filters. For 92x92mm.

Gillian pointer knob. Black with silver inlay on top. Nose indicator with white line. Size (DxH): 27x19mm. 6,3mm shaft hole. Set-screw.

Female Plug, angled.

Open jack, 6,3mm. Mono. Switched.

Round cable clip with adhesive bottom. Works on any clean, flat, fat-free surface.
Diameter: 6mm.

Black metal, reflecting inwards, vertical refractor style
Without LED. For 5mm LEDs.

Metalized Polyester, Tubular, 630V/220VAC, Tolerance J 5%
0,47uF
Dimensions (L x D): 31x14 mm

Diameter: 19mm
6,3mm round shaft, set-screw

Absolute best sounding caps for tone circuits, filters, etc. Size (LxDxH): 6,5x5,5x4mm.

Length: 30mm. Circular spacer with hole, made of insulating material. Hole dimension: 4,2mm. Outer diameter: 6,3mm. Material: polyamide, natural color.

Chickenhead knob, black with white indicator triangle.
6,0mm round shaft, set screw. Length: 45mm. Height: 20mm.

Replacement tip for use with Les Paul style switches, sliders or faders. Cream, screw on. Round drop style.

Tantal Radial 2,5mm

Plastic tray, made out of Polystyrol. Useful for working with components or etching PCBs. Base dimensions: 210 mm x 150 mm. Outer dimensions: 258 mm x 197 mm. Maximum temperature: 70 °C. Red.

Stranded high quality tinned hook-up wire, copper. AWG 22 gauge (0,32mm2 crossectional area). 600V, insulated. UL style 1015. Temperature rating: 105'C. Length: sold per meter. White.

XLR-5 Jack high quality.

Gold aluminum knob with indicator notch. Size (DxH): 15x17mm
6mm round shaft, push-on.

High quality TO-18 transistor socket.

Sturdy 3PDT footswitch with miniaturized body. Dimensions (LxWxH): 17x13x13mm.

Diameter: 20mm
6,3mm round shaft, set screw. White line indicator on top and dot indicator on skirt.

Brass spacer bolt, nickel plated. M3 thread (2x interior).
Spacer length: 20mm.

Nylon capacitor mounting clamp for electrolytic capacitors. Given diameter is approximate since clamps are elastic and may be used for smaller or larger capacitors.
Diameter (inner): 50mm. Includes screw and nut.

Diameter: 19mm. White color.
6,0mm round shaft, push-on