Banzai

Thin Nut File .056. Length: 15cm. Width: 12mm.

Threaded nut for 6,35mm (1/4 inch) audio jacks. External diameter: 9,35mm. Thread diameter: 6,35mm. Total length: 9,4mm.

Metal chips refill for use with the Universal Tip Cleaner base.

Deluxe jack for standard 2mm tip plug. Machined contact with turret terminal. Brass body with silver finish. Rating: 10A. Red color.

Timer CMOS 555, DIP8. 2.1-MHz, 250-µA, Low-Power Timer, made by Texas Instruments.

T&M Cloth covered Instrument Cable. Black. Length: 5m.

T&M Cable Microphone Cable. Black. Length: 5m.

Black cap for toggle switches.

Green cap for toggle switches.

White cap for toggle switches.

SPDT Single pole / double throw. On-On.
Heavy duty screw terminal switch. Mounting hole 12mm.

DPDT Double pole / double throw. On-off-On.
Heavy duty screw terminal switch. Mounting hole 12mm.

Suitable for use with standard 6mm bushings commonly found on toggle switches.

SPDT On-On Toggle Switch. Mounting hole: 12,2mm. Body Diameter: 16mm.

Special formula high performance glue for glueing tolex and tweed to wooden surfaces. Tin contains approximately 700g. Dries quickly, easy to use, yields good results.

Beautiful like a summer night, this tolex is a deep red with slight black shadow elements, adding depth and structure like clouds in the sky. Sold per yard (91,4 cm), please specify length.

Black color board. This board is a recreation of the circuit board found in Tone Bender Professional MKII pedals. When drawing the layout, an original board was closely referenced to ensure a proper match and fit. Since the MKII boards were cut from stripboard, this board follows the same format but is completely ready for soldering with precut traces and drilled mounting holes.

MKII fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in Tone Bender Professional MKII pedals. When drawing the layout, an original board was closely referenced to ensure a proper match and fit. Since the MKII boards were cut from stripboard, this board follows the same format but is completely ready for soldering with precut traces and drilled mounting holes.

Tonebender MkI 'Goldie' style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. The mounting holes are spaced to fit our Vintage Fuzz PCB Bracket (SKU 74834).

String through body top mounting string ferrules. Set contains 6 pieces. Size: 5/32 inch. Black.

String through body top mounting string ferrules. Set contains 6 pieces. Size: 5/32 inch. Gold.

High demand 3PDT footswitch, epoxy sealed, rated 30.000 cycles. PC mount.

Toronzo Control plate, rotary volume wheels plate, for Jaguar and Mustang style guitars. Chrome.

Guitar assembly kit, Tele-style guitar. Mahogany body. 22 frets. The direct and versatile sound is yours after you have built this kit. The mahogany body has a warm and pleasing sound. The fit of the maple neck with pau ferro fingerboard is perfect. All ingredients for hours of inspiration. The neck is already fitted with frets and the neck and body are already aligned.

Control Plate for Tele Bass. Chrome finish.

Thumb rest for bass guitar. Made of black plastic.

Diameter: 13,5mm. Blue color.
6,3mm round shaft, set screw.

Diameter: 13,5mm. Gray color.
6,3mm round shaft, set screw.

Diameter: 13,5mm. Orange color.
6,3mm round shaft, set screw.

Diameter: 13,5mm. Violet color.
6,3mm round shaft, set screw.

Diameter: 13,5mm. Yellow color.
6,3mm round shaft, set screw.

End bell for upper cover for lay down transformers with 4 1/8 inch lamination. Size: 105x88mm. Mounting: 88x70mm. Hole diameter: 6mm. Depth: 26,5mm. Black.

Transformer end bell for 4,5 inch (EI114) lamination. For Drop-Through mounting, supports slotted lamination mounting. Silver-Zinc finish.

End bell for upper cover for lay down transformers with 3-11/36 inch lamination. Size: 86x72mm. Mounting: 72x57mm. Hole diameter: 5mm. Depth: 23mm. Black.

End bell for upper cover for vertical transformers with 3,75 inch lamination. Size: 96x81mm. Mounting: 79x64mm. Hole diameter: 6mm. Depth: 26,5mm. Black.

Locking nut for use with 8/32 inch thread screws, recommended for mounting transformers and chokes. Diameter: 4mm.

Mains transformer for Leslie 122/147. Used for conversion of a 117 V Leslie to 230 V, direct exchange without modification of the chassis.

Used to mount TO220 transistors to heatsinks.

This is an easy to install mod to avoid treble bleed and get a more uniform tone on your volume control from 1 - 10. Hand soldered 150k carbon composition resistor in parallel with a 1nF ceramic capacitor.

This is an easy to install mod to avoid treble bleed and get a more uniform tone on your volume control from 1 - 10. Hand soldered 150k carbon composition resistor in parallel with a 1nF Orange Drop capacitor.

Black Tremello knob with red indicator line. Size (DxH): 19x15mm. For knurled shaft 6,0mm. Push-On.

Replacement tip for use with tremolo arms. Black.

Replacement tip for use with tremolo arms. Mint, screw on.

Replacement tip for use with tremolo arms. Vintage Cream, screw on.

Tremolo Buzz Stop. Roller attachment for Jaguar

Tremolo mounting screws, 50 pieces. For vintage tremolo. Length: 1 inch (2,54cm). Chrome.

Tremolo mounting screws, 6 pieces. For vintage tremolo. Length: 1 inch (2,54cm). Chrome.

Nickel plated tremolo spring. Set of 3 pieces.

Set of 6 tremolo springs, soft tension.