Luthier Tools

Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010 thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel. Comes with 2 sizes: 3-1/8 x 7/8 x .010 inch - 1/4 inch protection on either side of the fret and 3-1/8 x 0.59 x .010 inch - 3/8 inch protection on either side of the fret.

Convenient and practical. Made of aluminum alloy, heavy and durable. Radius adjustable via thumbwheel. Size: 13,8x5cm. Get a perfect bend on enough wire for a whole guitar in just seconds.

Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot - you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck. Used with Fret Press inserts (available separately) to press frets into guitar fret boards.

Brass Fret Press inserts. 2,5 inch width. Radius: 10 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 14 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 20 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 7,25 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: Flat.

Diamond replacement sheets for Hosco nut work table.

Chisel starter set of four wood chisels (3/6/12/24 mm) in a canvas roll-up tool bag

guitar tech padded mat, with magnetised storing area for small parts

Set of 5 scrapers small scrapers, different shapes, commonly used in instrument manufacturing. Thicknesses: 0,2mm and 0,4 mm.

MusicNomad Fret Rocker+ with String Action Gauge/Pickup Ruler (MN822)

MusicNomad Fret Shield (MN801) - Fretboard Protector Guard for G-Electric Guitar Fret Scale

MusicNomad Fret Shield (MN803) - Fretboard Protector Guard for M - 25,34 Guitar Fret Scale

MusicNomad Fret Shield (MN805) - Fretboard Protector Guard for B - 34 Bass Fret Scale

Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. Fits 3/8 inch (9,5mm) thread pots.

Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. Fits M8 thread pots.

Benedetto archtop guitar bridge string marker

Endpin jack wrench

Fingerboard guards for bass, set of 4

Fret Dam for fretboard repair, teflon

Fretbar understring leveler, 11,5 cm length

Fretbar understring leveler, 45,5 cm length

Jack the Gripper

Lightweight soundhole clamp, 6 inch (15 cm) throat depth

neck shim 0.25 degree shaped for electric bolt-on neck guitar

neck shim 1.00 degree shaped for electric bolt-on neck guitar

Excellent support for a guitar neck while pressing or hammering frets, or a lower clamping caul for regluing a fingerboard. You could even saw it into shorter lengths to make lower clamping cauls for glue-in fret jobs.

Pickup routing template for humbucker, body rout

Pickup routing template for P90, body rout

Rock-n-Roller neck rest, 9.5 cm height for solidbody guitars

Set of two Rock-n-Roller neck rests with bench pad

Soundhole clamp cauls, set of 4 (2 flat and 2 curved cauls), 4 felt disks included

Tele jack installation tool, hardened steel

Stainless steel scalpel holder #4, for blades 20 up to 23

Surgical scalpel blades no.26, sterile, straight cutting edge, 20 pieces

Thompson crack repair cleat, indian rosewood