Marshall Miniswitch cover
Marshall switch cover for Marshall miniswitch
€4,44
including VAT
19%
, [plus shipping]
Miniswitch 4PDT MVSJCM
Miniswitch 4PDT for Marshall Valvestate, JCM2000, DSL40C, DSL100H. Replaces Tone-Shift and Clean/Crunch on JCM2000, DSL100 7 DSL50. Replaces SW1 (CLEAN/CRUNCH) and SW4 (TONE SHIFT) on DSL40C, DSL100H. Replaces the Loop Level switch on the AVT-100.
€7,98
including VAT
19%
, [plus shipping]
Marshall switch AVT150-LED
Marshall momentary switch with LED.
€6,75
including VAT
19%
, [plus shipping]
Marshall switch AVT150
Marshall switch, without LED, without knob for AVT150.
€4,86
including VAT
19%
, [plus shipping]
Marshall Miniswitch DPDT-VALVESTATE
Marshall, Miniswitch, DPDT. Used by Marshall in the New Valvestate, EL2020, JVM410,TSL100, MG Serie, MG100DFX (CLEAN/CRUNCH, channel switch, OD1/2, FDD).
€7,98
including VAT
19%
, [plus shipping]
Marshall Miniswitch 4PDT
Marshall, Miniswitch, 4PDT. Used in the JCM2000 Series, DSL100 and DSL50 as Tone-Shift and Clean/Crunch.
€8,09
including VAT
19%
, [plus shipping]
Marshall knob for AVT150
Marshall knob, oval, for Marshall switch AVT150-LED.
€3,61
including VAT
19%
, [plus shipping]
Marshall DATA-Control
Marshall DATA-Control of the Marshall JMP-1 Preamp.
€16,20
including VAT
19%
, [plus shipping]
Marshall Pilot Light Purple
Marshall LED-Indicator for the Marshall Vintage Modern amp series, purple. Must use a resistor for use with 6.3V (for example SKU 27710).
€16,07
including VAT
19%
, [plus shipping]
Marshall 1/4" jack PC stereo
Marshall 1/4" jack PC mount stereo, switched, 4 terminals. NC tip switch.
€5,89
including VAT
19%
, [plus shipping]
Marshall 4-8-16 Impedance Selector
Original Marshall Replacement. Rotary Impedance Selector switch. Modern style. 4/8/16 Ohms.
€42,35
including VAT
19%
, [plus shipping]
Marshall 1/4" jack PC mount mono
Original Marshall replacement. Marshall 1/4 inch jack PC mount mono. Input with 4 terminals, solder pins.
€7,39
including VAT
19%
, [plus shipping]
Marshall Voltage Selector
Original Marshall Replacement. Rotary Voltage Selector switch. Modern style. 110V/220V/230V.
€43,11
including VAT
19%
, [plus shipping]
Marshall Pot 2,2M lin 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Stereo Pot 1M log 24mm
Direct Marshall replacement for hardwired series. Stereo. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,95
including VAT
19%
, [plus shipping]
Marshall Pot 1M log 14mm-STE-STR
Marshall potentiometer A1M log stereo, PC-mount, 14mm, used in the Marshall Vintage Modern series
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 1M log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Pot 1M log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€5,55
including VAT
19%
, [plus shipping]
Marshall Pot 500k log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Pot 250k lin 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Pot 220k log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€5,55
including VAT
19%
, [plus shipping]
Marshall Pot 200k log 14mm-STE-STR
Marshall potentiometer A200k log stereo, PC-mount, 14mm, used in the Marshall Vintage Modern series
€6,24
including VAT
19%
, [plus shipping]
Marshall Pot 200k log 11mm-PC-ANG
Marshall potentiometer A200k lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 100k log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€5,55
including VAT
19%
, [plus shipping]
Marshall Pot 50k log 11mm-PC-ANG
Marshall potentiometer A50k log PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 50k lin 9mm-PC-ANG
Marshall potentiometer B50K MG4-series, for MG15R. Overdrive Gain, EQ Middle, EQ Treble.
€4,87
including VAT
19%
, [plus shipping]
Marshall Pot 200k lin 11mm-PC-ANG
Marshall potentiometer B200k lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 50k lin 11mm-PC-ANG
Marshall potentiometer B50K lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 25k log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Pot 25k lin 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Indicator Light, 110V
Original Marshall Replacement Part
110V, 11x11mm
110V, 11x11mm
€11,01
including VAT
19%
, [plus shipping]
Marshall Pot 22k log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€5,55
including VAT
19%
, [plus shipping]
Marshall Pot 20k lin 11mm-PC-ANG
Marshall potentiometer B20k lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Indicator Light, 6V
Original Marshall Replacement Part
6V, 11x11mm
6V, 11x11mm
€15,54
including VAT
19%
, [plus shipping]
Marshall Pot 20k lin 11mm-PC-ANG-STE
Marshall potentiometer B20k lin PC mount vertical, 11mm. Stereo. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 20k log 9mm-PC-ANG
Marshall potentiometer A20K MG4-series, for MG15R. Bass EQ.
€4,87
including VAT
19%
, [plus shipping]
Marshall Bias Pot 22k lin
direct Marshall replacement for JMP PC mount
€3,57
including VAT
19%
, [plus shipping]
Marshall Pot 10k Stereo lin 16mm
direct Marshall replacement
€6,91
including VAT
19%
, [plus shipping]
Marshall Pot 10k REV log 11mm-PC-ANG
Marshall potentiometer C10K lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€4,97
including VAT
19%
, [plus shipping]
Marshall Pot 10k log 16mm-PC-ANG
Marshall Potentiometer A10K, PC-Mount, 16mm vertical. Gain control of the 19 inch power amps 9100, 9200.
€7,54
including VAT
19%
, [plus shipping]
Marshall Pot 10k lin 9mm-PC-ANG
Marshall potentiometer B10K MG4-series, for MG 100FX, all positions.
€4,87
including VAT
19%
, [plus shipping]
Marshall Pot 5k lin 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Marshall Pot 5k lin 16mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 16mm. extra long threaded area
Split Shaft, for all knobs.
€5,55
including VAT
19%
, [plus shipping]
Marshall Pot 5k lin 9mm-PC-ANG
Marshall potentiometer B5K MG4-series, for MG15R. Reverb Level, Overdrive Volume, Clean Volume.
€4,87
including VAT
19%
, [plus shipping]
Marshall Pot 5k lin 11mm-PC-ANG
Marshall potentiometer B5k lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.
€14,15
including VAT
19%
, [plus shipping]
Marshall Pot 4,7k log 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€5,55
including VAT
19%
, [plus shipping]
Marshall Pot 1k lin 24mm
Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area
Split Shaft, for all knobs.
€8,52
including VAT
19%
, [plus shipping]
Amp Cover for Marshall Tops
Original Marshall amp cover. Fits all full size heads.
€41,33
including VAT
19%
, [plus shipping]
M-30 Watt Output Transformer
Output Transformer for Marshall JTM 30.
€124,00
including VAT
19%
, [plus shipping]
Marshall Amp feet, 2pcs.
Original Marshall parts. Set of 2 pieces.
€20,69
including VAT
19%
, [plus shipping]
Marshall Amp Plate 1960A
Marshall rubberpad amp plate for Cabinets like 1960A. Size: 76x254mm.
€12,36
including VAT
19%
, [plus shipping]
Marshall Anti-skid tray.
Marshall anti-skid tray. As used on top of Marshall cabinets. Original Marshall replacement part.
€17,42
including VAT
19%
, [plus shipping]
Marshall back metal panel
Marshall back metal panel. As used on JCM 800. Original Marshall replacement part.
€119,56
including VAT
19%
, [plus shipping]
Marshall Badge 1960 Vintage
Original Marshall replacement. Marshall vintage 1960 badge.
€17,68
including VAT
19%
, [plus shipping]
Marshall black/gold push-on knob
Original Marshall knob. Black with gold cap on top. Push-on.
€3,07
including VAT
19%
, [plus shipping]
Marshall black/gold set screw knob
Original Marshall knob. Black with gold cap on top. Set-screw.
€2,18
including VAT
19%
, [plus shipping]
Marshall Caster Cups Straight
Marshall Caster cups for straight cabinets. Package contains 4 caster cups.
€8,15
including VAT
19%
, [plus shipping]
Marshall Chrome Nut for Plexi Switch
Chrome nut for Marshall Plexi Toggle Switch SWMPXTG.
€3,53
including VAT
19%
, [plus shipping]
Marshall Footswitch box, one button
Original Marshall Replacement. One Button, ¼ inch plug. On/Off.
€47,85
including VAT
19%
, [plus shipping]
Marshall Footswitch box, one button LED
Original Marshall Replacement.
€54,12
including VAT
19%
, [plus shipping]
Marshall Footswitch box, two button
Original Marshall Replacement. Channel and Reverb.
€118,05
including VAT
19%
, [plus shipping]
Marshall Footswitch box, two button LED
Original Marshall Replacement. Clean/OD.
€72,19
including VAT
19%
, [plus shipping]
Marshall Footswitch CH-CH
Original Marshall Replacement. Channel and Chorus.
€61,88
including VAT
19%
, [plus shipping]
Marshall Front corner set of 4
Original Marshall plastic corners for amps and cabs. Set of 4 pieces. Comes with mounting rivets.
€16,48
including VAT
19%
, [plus shipping]
Marshall Gold Cap for handles
Original Marshall replacement part. Old style gold cap for vintage handles. Sold individually.
€11,75
including VAT
19%
, [plus shipping]
Marshall gold rivets, 100 pcs.
Original Marshall gold rivets for fastening corners. Saver package of 100.
€21,12
including VAT
19%
, [plus shipping]
Marshall gold rivets, single piece
Original Marshall rivets for fastening corners. Sold individually.
€0,45
including VAT
19%
, [plus shipping]
Marshall grill cloth Bluesbreaker
Original Marshall replacement. 86,4 cm wide.
€48,89
including VAT
19%
, [plus shipping]
Marshall handle, black caps.
Original Marshall replacement parts. Large, vintage style, black, with black caps.
€10,12
including VAT
19%
, [plus shipping]
Marshall Impedance Switch JCM900
Marshall, Impedance and Modeswitch (HIGH-LOW, PENTODE-TRIODE).
€9,56
including VAT
19%
, [plus shipping]
Marshall jack PCB-DPDT
Marshall jack 6,3mm, PCB mount, with DPDT switch. Used on the JTM30, JTM60 and JCM60. Also used in the rack pre amp 9001.
€9,09
including VAT
19%
, [plus shipping]
Marshall jack PCB-SPDT
Marshall jack 6,3mm, PCB mount, with SPDT switch.
€6,15
including VAT
19%
, [plus shipping]
Marshall jack PCB-SPKR
Marshall 6,3mm jack, PCB mount. Used on the JVM410HJS as speaker jack.
€6,15
including VAT
19%
, [plus shipping]
Marshall knob black/silver screw on
Original Marshall knob "JUBILIEE" style. Black with silver cap on top. Screw-On.
€5,32
including VAT
19%
, [plus shipping]
Marshall large plastic vent
Original Marshall replacement part. Large plastic vent. It measures 17 5/8 inch in length and 3 inch in width.
€13,41
including VAT
19%
, [plus shipping]
Marshall MG rocker switch
Original Marshall replacement part. Black rocker switch for MG amps.
€8,79
including VAT
19%
, [plus shipping]
Marshall mono jack plate
Mono jack plate for back of cabinets. Original Marshall Cabinet parts.
€86,41
including VAT
19%
, [plus shipping]
Marshall old style inner clamp
Original Marshall replacement part. Old style inner clamp. Sold individually. Chrome color.
€6,70
including VAT
19%
, [plus shipping]
Marshall PEDL-91003 Footswitch Box
Double footswitch with LED indicators and stereo plug. 5m cable length. Fits DSL401, VS100, AS50D, AS50R, MHZ15, MHZ40C and MA-Series. Includes sticker set.
€42,95
including VAT
19%
, [plus shipping]
Marshall Plexi Toggle Switch (SWMPXTG)
Original Marshall Toggle Switch.
€68,67
including VAT
19%
, [plus shipping]
Marshall Rear corner set of 4
Original Marshall plastic corners for amps and cabs. Set of 4 pieces. Comes with mounting rivets.
€17,11
including VAT
19%
, [plus shipping]
Marshall Screw CSK M6X30
Marshall screw, CSK, M6x30. Used for ecample in the JTM60, JCM600, JCM900, JCM2000 series, etc. Black.
€4,28
including VAT
19%
, [plus shipping]
Marshall Side Handle
Original Marshall replacement part. Recessed plastic side handle for cabinets. Sold individually.
€15,80
including VAT
19%
, [plus shipping]
Marshall silver rivets, 100 pcs.
Original Marshall silver rivets for fastening corners. Saver package of 100.
€30,80
including VAT
19%
, [plus shipping]
Marshall silver rivets, single piece
Original Marshall silver rivets for fastening corners. Sold individually.
€0,45
including VAT
19%
, [plus shipping]