Sets, Kits, Specials

Robust amplifier module for universal use. The module is cast humidity-proof and shake-proof. The casting compound and the module case consist of a special, highly heat-conductive plastic. So no additional heat sinks are needed. The module is protected electronically against overheating and overload.

Package contains 1000 pieces of 2,5x100mm cable ties in assorted colors (red, black, natural).

Contains approx. 100 pieces of values between 3,3pF and 0,1uF.

Bass to Tremolo Conversion Kit. Turn the Bass instrument channel on your silverface into a footswitchable vintage tremolo effect for the normal channel.

Tone Stack Mod Kit. Experiment with the tone of a vintage Silverface or Blackface Fender amp by modifying the tone stack components.

Value Pack with 150 pieces of metal cotter pins. Made of #70 steel.

Set with items needed to build a True Bypass Box with two loops.

Set with the basic items needed to build a guitar effect pedal
This set is a cost effective way to a guitar effect pedal.

Set with the basic items needed to build a guitar effect pedal
This set contains our selection of very good quality items.

The Bontempo Kit is a powerful Tap Tempo & Modulation solution for PT2399 delays. 2 User Presets, 6 Tempo Divisions, 6 Modulation Waveforms, Clean Mode and more. Kit contains ICs and PCB.

The Electric Druid DIGIDELAY PCB Board set is for the Electric Druid DigiDelay 4 second digital delay project. It includes one PCB, one DIGIDELAY delay processor chip and two 128kB SRAMs. The PCB is designed to fit into a Hammond 1590BB enclosure in landscape format, and can be used with PCB mounting pots for a simple, reliable construction.

A PCB for the Hard Bargain distortion project. This PCB is designed to fit into a Hammond 1490BB enclosure in landscape format, and you can also get a set of four PCB mounting pots for a quick, easy, reliable construction. The PCB is FR4 fibreglass for strength, with plated through-holes and green soldermask and white screen print on both sides. The PCB layout can accept film capacitors with either 5mm/0.2 inch or 7.5mm/0.3 inch lead spacing, so you’re not limited in your choice of capacitors.

Approx. 50 pieces of varios capacitance and voltages.

Enameled copper wire 0,15mm. 7 different colors. 7 spools with 10m each.

Plastic enclosure with transparent front plate. Dimensions: 284 x 160 x 76mm.

Approx. 50 pieces of coils, filters and chokes.

Frequency Central Stasis Leak PCB. Stasis Leak is a 48kHz DSP effects module, providing a choice of stereo chorus, stereo plate reverb and tap tempo delay. Stasis Leak is based around a Belton ABE-FX sub board, which in turn is based around a Coolaudio V1000 chip.

Box contains 100 pieces of highly flexible black heat shrink tubing. Made from Polyolefin. Quickly shrinking. Shrinkage rate: 2:1. Pieces are of approx. 10cm length.

Box contains 100 pieces of highly flexible clear heat shrink tubing. Made from Polyolefin. Quickly shrinking. Shrinkage rate: 2:1. Pieces are of approx. 10cm length.

Box contains 100 pieces of highly flexible green heat shrink tubing. Made from Polyolefin. Quickly shrinking. Shrinkage rate: 2:1. Pieces are of approx. 10cm length.

Box contains 100 pieces of highly flexible white heat shrink tubing. Made from Polyolefin. Quickly shrinking. Shrinkage rate: 2:1. Pieces are of approx. 10cm length.

Pack contains 100 pieces of assorted heat shrinks. Several colors and sizes are included.

Value Pack: 140 pieces. Jumper wire set for use with prototyping boards. Assorted colors and lengths, isolated.

50 pieces of Red 3mm LEDs.

Red, Green, Yellow and Blue LEDs in 3mm and 5mm types. Great value at 100 LEDs. All top quality, long-life, RoHS compliant LEDs.

50 of the most popular Linear ICs including TL072, NE555, 7805, LM741, LM324, LM358, 78L05 and many more. These are all top quality brand new IC's and not factory seconds or discontinued lines. Packed in separate bags.

Value Pack: 100 pieces of multilayer ceramic caps. Several common types, packed in separate bags.

Extensive Value Pack with 300 pieces of nuts ranging from M3 to M10.

Loudspeaker output transformer amplifier for general use: e.g. increase of output of small radio- CD- tape- microphone amplifiers etc.

Metal film resistor 0,25W value pack. Package contains 100 pieces each of: 47 ohm, 100 ohm, 150 ohm, 220 ohm, 270 ohm, 330 ohm, 390 ohm, 470 ohm, 560 ohm, 680 ohm, 820 ohm, 1K.

Metal film resistor 0,25W value pack. Package contains 100 pieces each of: 2k, 15k, 18k, 22k, 27k, 33k, 39k, 47k, 56k, 68k, 82k, 100k.

Contains 50 power resistors. Different types and values.

Approx. 100 pieces of silicon diodes.

Robust stereo preamp, universal use, but great for microphones actually! The module is simply connected between a stereo power amplifier and a too weak signal source.

Approx. 100 pieces of tantalum caps. Bead and AX.

Value Pack: 100 pieces. 2N2222, 2N3904, C9012, C9013, 2N5401 and others, all brand new and top quality. A very special buy for 100 pieces. Packed in separate bags.

Set with items needed to build a True Bypass Box.

The set contains:
Carbon Composition resistors: 1x 100 Ohm, 1x 10k. Tubescreamer Chip: 1x JRC4558D. Chip socket: 1x 8pin gold plated precision socket. Instructions can be downloaded (see details).

Set with items needed to build a Volume switcher box.

The LY14-Multicolor value package contains 9 rings of stranded core wire (length of each ring: 10m. Cross-sectional area: 0,14mm). The wire is insulated. The following colors are included: red, black, blue, yellow, green, white, orange, grey, brown.

The TR50-Multicolor value package contains 5 rings of stranded core wire (length of each ring: 10m. Cross-sectional area: 0,5mm). The wire is insulated. The following colors are included: red, black, blue, white, green/yellow.