Shadow

Nanoflex pickup for the ukulele. Similar to classical guitar pickups, the flexible SH NFX-UK will be installed by simply sliding it underneath the saddle, with no drilling necessary. The attached extremely light preamp with 3V cell battery holder, volume control and output socket mounts to the bridge end. A 12 foot (3,5m) cable is included. 100% hum-free while preserving the natural sound of the ukulele.

The Shadow SH001 is an adhesive for transducers.

The Shadow SH009 is a prewired stereo endpin jack with a stereo 3,5mm plug.

The Shadow SH1110-UK is an undersaddle pickup with endpin for Ukulele.

The Shadow SH136 is a battery cover that fits Shadow items SH P4, SH P7 and the SH LC series.

The Shadow SH3000 is a quick mount violin transducer with volume and tone controls. It comes with a 4m cable.

Small spot transducer with 6,3mm jack connector.

Twinducer with 6,3mm jack connector.

Quadducer with 6,3mm socket

Singleducer with 3,5mm jack connector.

Singleducer with 3,5mm plug.

The Shadow SH920 is a flat top mandolin pickup with volume control, 4m cable, flat rosewood bridge and ebony arch top bridge.

The Shadow SH926 is an arch top, height adjustabl mandolin bridge with pickup and 6,3mm jack socket. Includes volume and tone controls.

The Shadow Shadow SH 928 NMG4 is a Quad NanoMAG 4-pickup system for Teardrop Mandolin. This guarantees a perfectly balanced output and no click sounds. Easy installation. Volume, bass and treble controls.

The Shadow SH930-G is a 6-string banjo bridge with pickup, including volume and tone controls and a 4m cable.

The Shadow SH941 is a set of two bridge pickups. The twin pickups fit between wing and foot. 4m cable included.

The Shadow SH951 is a single side Upright Bass bridge pickup with 6,3mm jack socket.

The Shadow SHNFX EQ-T is a NanoFlex pickup with onboard preamp (volume, tone and tuner) for Ukulele.

The Shadow SB2 is an Upright Bass twin transducer with 6,3mm jack socket.

The Shadow SV-1 is a violin transducer with 6,3mm jack socket. 12mm diameter.

Quickly mountable pickup for use below saddle. With 6,3mm endpin jack. For classical guitar. Height: 1,8mm. Fits guitars with a standard bridge slot width of 2,3 mm (3/32 inch). Includes attached 1 foot cable with 6,3mm (1/4 inch) output socket.

SH 066-9 is a passive piezo pickup for acoustic guitars with an 9mm bridge slot. Features an incorporated saddle that has been compensated for perfect intonation. The pickup uses large, high output piezo ceramics with a frequency response of 20 Hz to 30000 Hz which provide a superior dynamic range. The Shadow SH066-9 is ideal for finger picking. It requires a bridge slot width of 9mm. Pickup saddle and ceramics are set in into pickup case at an 11 degree angle to provide maximum output and dynamic. Fits as a direct replacement on Ovation electric/acoustic guitars. Dimensions (LxWxH): 8,2x1x0,9cm.

Western guitar bridge pickup with incorporated saddle. Fits guitars with a standard bridge slot width of 2,3mm (3/32 inch).

The Shadow SH 1110 is a passive piezo pickup for acoustic and classical guitars. It fits steel string guitars with a standard bridge slot width of 2,3mm. (3/32 inch) The pickup installs under the original saddle. The height of the pickup is 1,8mm. It comes with an endpin jack and a mini plug jack connector.

Black. Active humbucker with volume control, endpin jack and separate output cable (3,5m length). The pickup delivers round bass notes, full mids and crisp highs. Accurately reproduces the full frequency spectrum of the acoustic guitar.

The Shadow SH 1900 is an easily installable pickup for classical guitars. You just take out the bridge saddle and replace it with the pickup. The pickup

The Shadow SH 663 Active Singlebucker is a stacked humbucker with Alnico magnets in the upper coil. The lower coil is a dummy coil without any impact on the sound, while still cancelling out the hum like traditional humbucker pickups. You get singlecoil sound with the noise benefits of a humbucker. Closed pickup cover design. The pickup includes an active preamp to provide a high power, low impedance output. Extremely low noise and current consumption.