Solder Lacquer SK10, 200ml

Protects from corrosion, makes soldering easier. Can with 200ml. Dries within 30 minutes. Lacquer-like clear flux on colophoneum basis.

Product Safety

Signal word (CLP): Danger
GHS02 GHS07
Contains: Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane; 2-Propanol; Isopropyl alcohol; Isopropanol; Acetone; Propan-2-one; Propanone; 1-Methoxy-2propanol; Monopropylene glycol methyl ether; Rosin

Hazard statements: (CLP):
H222 - Extremely flammable aerosol.
H229 - Pressurized container: May burst if heated.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H336 - May cause drowsiness or dizziness.
H412 - Harmful to aquatic life with long lasting effects.

Safety statements (CLP):
P102 - Keep out of the reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Do not pierce or burn, even after use.
P261 - Avoid breathing vapours/spray.
P271 - Use only outdoors or in a well-ventilated area.
P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
P280 - Wear protective gloves/eye protection.
P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C.
P501 - Dispose of contents/container to a hazardous and special waste collection point in accordance with local, regional, national and/or international regulations. EUH-statements : EUH066 - Repeated exposure may cause skin dryness or cracking.
Other hazards: Does not contain PBT and/or vPvB substances ≥ 0.1%, assessed according to REACH Annex XIII.