Tolex Glue TIN-700

		(0 reviews)

Special glue for glueing tolex and tweed to wooden surfaces. Tin contains approximately 700g.

Useable with PVC, vinyl, leather, artificial leather, ABS, polyamide, polytherephthalate foils, celluloseester, PUR, elastomeres among each other and with wooden materials, textiles and leather.

Areas must be dry and clean (especially clean of oils, fat or parting agents). Apply the glue evenly on both sides. When glueing cold (room temperature) then let sit dry for 5 min. until the glue is touchably dry. Then press materials together shortly and forcefully.

Glueing warm is possible for temperatures of up to 80 degrees celsius. Let glue dry totally (min. 30 Min.), then activate by applying warmth (radiation or hot air) and press together immediately. Let cool down while still applying force. Final stability is reached after several days.

Use is approximately 150–250 g/m², depending on the surface.

Product Safety

GHS02 GHS08
Signal word: Danger
Hazard statements
H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
H304 May be fatal if swallowed and enters airways.

Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P331 DO NOT induce vomiting.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Special hazard statements: for human and environment:
Risk of electric shock: Container and applicator conduct electricity. Keep away from live parts.