Waterbased black grain filler - 250ml cup
NitorLACK grain filler is a product designed to fill wood pores and prepare the surface for subsequent applications of polyurethane, nitro, water and shellack. The product is compatible with our water-based stains to give the tone you want. You can adjust the density with water, it is easy to apply, fast drying, does not crack and has good sanding. It is especially recommended for open pore woods such as Mahogany, Ash or Rosewood. NitorLACK Guitar Grain Filler is the best option to fill and level the pores of woods before varnishing.
• Fills wood pores without sagging, shrinking or cracking
• Compatible with all finishes, stains, primers and topcoats
• Specially developed colours for instruments. Neutral is perfect for custom stains with dyes and pigments
• Easy to apply, dries fast and sands easily
Non-toxic, solvent-free and non-flammable. Ready to mix with water, a 1: 2 ratio of water to filler works fine. Apply to wood, scrape or wipe off excess, let dry, sand the surface level and wipe off with a damp cloth - it's easy! Now you're ready to spray a smooth, flawless, professional finish. No need to worry about shelf life: when stored dry, the filler will last indefinitely. 250 ml cup.
Product Safety
Signal word: Danger
This product is classified as: Highly flammable liquid. Possibility of serious adverse effects through repeated or prolonged exposure and through inhalation. Possibility of eye and skin irritation. Possibility of toxic effects for reproduction in category three. Possible harm to the unborn child. Possibility of adverse effects with symptoms of mild poisoning through inhalation. Vapors may cause drowsiness and dizziness.
Classification of the preparation: Harmful. Highly flammable.
Special hazards associated with the preparation and
safety instructions:
R 10 Flammable
R11 Highly flammable
R38 Irritating to skin
R20/21 Harmful by inhalation and in contact with skin.
R 23/24/25 Toxic by inhalation, in contact with skin and if swallowed.
R 36 Irritating to eyes.
R37 Irritating to respiratory system.
R38 Irritating to skin.
R 39/23/24/25 TOXIC: Danger of serious irreversible effects through inhalation, contact with skin and if swallowed.
R 48/20 Harmful: Danger of serious damage to health by prolonged exposure through inhalation.
R 63 May cause possible harm to the unborn child.R65 HARMFUL: May cause lung damage if swallowed.
R66 Repeated exposure may cause skin dryness or cracking.
R67 Vapours may cause drowsiness and dizziness.
S23 Do not breathe fumes, vapours or spray.
S36/37 Wear suitable clothing and gloves.
S 16 Keep away from sources of ignition - no smoking.
S 9 Keep container in a well-ventilated place.
S 51 Use only in well-ventilated areas.
Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurised container: may burst if heated.
Eye Irrit. 2H319 Causes serious eye irritation. STOT SE 3H336 May cause drowsiness or dizziness.
Hazard-determining components of labelling: Acetone n-butyl acetate
Hazard statements: H222-H229 Extremely flammable aerosol. Pressurised container: may burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P261 Avoid breathing vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
P312 Call a POISON CENTER/doctor if you feel unwell.
P337+P313 If eye irritation persists: Get medical advice/attention.
P410+P412 Protect from sun exposure. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Additional information: Without adequate ventilation, explosive mixtures may form. Contains CAS 222716-38-3 Polyamide and fatty acid derivatives. May produce an allergic reaction. 2.3 Other hazards:
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
