DW-500 white medium thick cyanoacrylic super glue, 2oz (57g)
Starbond DW-500 White Medium CA glue is a medium super glue that dries bright white in color. This white super glue is ideal for hiding imperfections, filling white voids, and accenting specific areas in your projects. Starbond DW-500 White Medium CA glue can also penetrate narrow slots, bond closely-fitted parts, quickly repair material, and be sanded down and polished to a high gloss finish.
It is important to keep in mind that the colored CAs have a slightly longer bonding time compared to the clear glues. Although bonding time is generally only 30-60 seconds, it can take much longer to dry when larger volumes of the adhesive is applied. For these instances, use of Starbond Accelerator is highly recommended.
Used for:
- Filling topnut slots to raise/readjust/refile
- Repair of cracks in bindings, pickguards, knobs and other plastic parts
- Filling cracks or voids in (pearloid) inlays
- Filling woodgrain or knots in light coloured wood (maple/white ash) while preparing for finishing. Wood colours can be matched by adding a small drop of amber or yellowish dye.
Specifications:
- 500 mPa·s viscosity
- White Medium Thick adhesive
- 0.008” (0,2mm) gap filling capability
- Bonding time: 40-60 seconds
Compatible With:
- Wood
- Metal
- Rubber
- Leather
- Ceramics
- Carbon Fiber
- Fiberglass
- Most Plastics
Product Safety
GHS07 GHS08
Signal word (CLP): Warning
Hazard statements: (CLP):
H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H332 - Harmful if inhaled.
H335 - May cause respiratory irritation.
H351 - Suspected of causing cancer.
Safety statements (CLP):
P201 - Obtain special instructions before use.
P202 - Do not handle until all safety instructions have been read and understood.
P261 - Avoid breathing vapors, mists or aerosols.
P264 - Wash hands, forearms and other exposed areas thoroughly after handling.
P271 - Use only outdoors or in a well-ventilated area.
P272 - Contaminated work clothing should not leave the workplace.
P273 - Avoid release to the environment.
P280 - Wear protective gloves, protective clothing and eye protection.
P302+P352 - IF ON SKIN: Wash with plenty of water. P304+P340 - If inhaled: Remove person to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P308+P313 - If in contact or affected: Get medical advice/attention.
P312 - Call a poison center or doctor/physician if you feel unwell.
P321 - Specific treatment (see section 4 of this safety data sheet).
P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 - If eye irritation persists: Get medical advice/attention.
P362+P364 - Take off contaminated clothing and wash before reuse.
P403+P233 - Store in a well-ventilated place. Keep container tightly closed.
P405 - Store locked up.
P501 - Dispose of contents/container in accordance with local, regional, national and international regulations.
Other hazards: Exposure may aggravate existing eye, skin or respiratory conditions.
