XVive U3D Dual Wireless System for PA/DJ Systems

Are you planning or do you regularly use a sound system for a parties, conferences, weddings or events? Consider the advantages of making that system WIRELESS. In addition to transmitting dynamic microphone signals, the U3 Microphone Wireless System can also transmit wireless audio signals for PA and DJ systems. Broadcasting on the 2.4 GHz band, the U3 transmitter connects to the mixer or DJ controller. The receiver connects to the XLR input of any active loudspeaker. The U3 system takes only seconds to set up and tear down; it also avoids all the hassles and risks associated with cables. No tangles, no tripping, no wrapping cables at the end of the night! The signal is clear and strong over a range of more than 90 ft. The U3 system features high‐resolution, 24‐bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz, and a signal‐to‐noise ratio of 110 decibels. This means the audio signal from your mixer or audio source to your speakers remains high‐fidelity - through the air! The internal batteries in the transmitter and receiver last up to 5 hours each. Both units can be easily charged at the same time using the included dual‐USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. If you need wireless audio for more than 5 hours, you can connect the units to any USB power source during use. One U3 set can be used for mono audio - or, for stereo systems, you can use one U3 set for the left channel, and a second set for the right channel. Either Mic or Line modes can be used to transmit audio signals, but Line mode is recommended due to its greater input dynamics. One U3 transmitter can transmit to multiple receivers, so you can send the same signal to several speaker cabinets simultaneously! This allows you to send a mono signal to two or three or four (or more) powered cabinets/monitors; or, with a stereo setup, a separate U3 system can be added on a different wireless channel, with multiple receivers connected to multiple powered cabinets. This allows you to fill any venue with sound!

Features:

digital wireless PA/DJ and microphone transceiver system

set with two transmitters and two receivers

for use with mixers/active boxes and dynamic microphones

Stereo / Dual mono / one transmitter to two receiver operation enables use in a myriad of applications

operates without battery or power supply

built-in rechargeable lithium battery

range up to 27 m / 90 ft. (without obstacles)

frequency range 20 Hz

20 kHz

< 5 ms latency

6 switchable channels

24 bit / 48 kHz A/D converter

2.4 GHz ISM worldwide operating band

110 dB dynamic range

signal to noise ration 110 dB

operates up to 5 hours per battery charge

ON button on transmitter

Power switch on receiver

Mic/Line button on the transmitter, allowing the transmitter to be used for transmitting line signals for DJ and PA applications and for transmitting microphone signals

channel select button

durable ABS composite housing

incl. USB Type A to Y-USB Micro B charging cable

Micro B USB charging port

black

weight per unit approx. 95 g